Dish Former Silhouette Die - 3" Oval Belt Buckle

Brand new! Use this tool to make shallow domed forms, such as trinket dishes, lockets, small containers, etc. 3" wide x 2-5/16" tall, 1/4" thick. Must be used with a large sheet of urethane (available separately). ***Will not fit in the discontinued Potter USA medium press***
SKU: SD-DF-030
  • Must use with urethane sheet (available separately)
  • Recommended use with 18g or thicker nonferrous metal
  • Watch Kevin's live video on Facebook for instructions on use: https://www.facebook.com/1640860751/videos/3191288137751079/
  • Anneal your metal before use and between pressings to prevent it from splitting at the edge of the die
  • Leave at least 1/4" (preferably 1/2") edge around the shape to allow for the metal to be formed into the die
  • Can stack two dies and make deeper dishes. Anneal and press multiple times, filling the center of the domed metal with small pieces of urethane and topping it with the urethane sheet.
  • If your upper platen is smaller/narrower than the shape of the die, place a larger spacer on top of the urethane sheet before use to ensure even pressure.
$40.00
$32.00
increase decrease
Availability: In stock
Ship to
*
*
Shipping Method
Name
Estimated Delivery
Price
No shipping options
  • Must use with urethane sheet (available separately)
  • Recommended use with 18g or thicker nonferrous metal
  • Watch Kevin's live video on Facebook for instructions on use: https://www.facebook.com/1640860751/videos/3191288137751079/
  • Anneal your metal before use and between pressings to prevent it from splitting at the edge of the die
  • Leave at least 1/4" (preferably 1/2") edge around the shape to allow for the metal to be formed into the die
  • Can stack two dies and make deeper dishes. Anneal and press multiple times, filling the center of the domed metal with small pieces of urethane and topping it with the urethane sheet.
  • If your upper platen is smaller/narrower than the shape of the die, place a larger spacer on top of the urethane sheet before use to ensure even pressure.
Customers who bought this item also bought

Urethane Sheet for Dish Former Silhouette Dies

DFUrethane
For use only with Dish Former Silhouette Dies. ~4.75" x 4.75" 60-70 durometer. Color may vary. 1/4" thick.
$20.00 $16.00

Dish Former Silhouette Die -3in. Rounded Square

SD-DF-003
Brand new! Use this tool to make shallow domed forms, such as trinket dishes, lockets, small containers, etc. 3" x 3" Square with Slightly Rounded Edges 1/4" thick. Must be used with a large sheet of urethane (available separately). ***Will not fit in the discontinued Potter USA medium press***
$40.00 $32.00

Dish Former Silhouette Die - 3in. Hexagon

SD-DF-015
Brand new! Use this tool to make shallow domed forms, such as trinket dishes, lockets, small containers, etc. 2-5/8" wide from center of each side. 3" wide from point to point. Overall die size 4-7/8" x 4-1/2". Coordinated to work with the Pancake Die - Hexagon SKU: PD 1539 1/4" thick. Must be used with a large sheet of urethane (available separately). ***Will not fit in the discontinued Potter USA medium press***
$40.00 $32.00

Urethane Pieces

UP
Bag of 10 pieces of urethane for use with impression dies. 95 durometer sheet. Pieces range from approximately 1/2 inch squares. Thickness of each piece is 1/4 inch. Note: These will fray, crack and deform with use, but you will get many uses from them.
$8.50 $6.80

Aluminum Spacer (4.5” x 7.75” x 1”)

Al-Spacer
This spacer is 4.5'' x 7.75'' and 1'' thick. Non magnetic Spacers are used in the press to lessen the amount of effort needed to extend the jack and activate the items being used in the press. Top and bottom platens are not meant to touch - it will cause the jack to overextend and cause leaking, or for jack to fail. Always use spacers on lower platen to take up space between platens.
$34.75 $27.80