Close
(0) items
You have no items in your shopping cart.
All Categories
    Filters
    Preferences
    Search

    Dish Former Silhouette Die - 2.5in. Circle

    $40.00
    Brand new! Use this tool to make shallow domed forms, such as trinket dishes, lockets, small containers, etc. 2-1/2" diameter. 1/4" thick. Must be used with a large sheet of urethane (available separately). Pairs well with PD661A
    SKU: SD-DF-001
    Ship to
    *
    *
    Shipping Method
    Name
    Estimated Delivery
    Price
    No shipping options
    Availability: In stock
    • Must use with urethane sheet (available separately)
    • Recommended use with 18g or thicker nonferrous metal
    • Watch Kevin's live video on Facebook for instructions on use: https://www.facebook.com/1640860751/videos/3191288137751079/
    • Anneal your metal before use and between pressings to prevent it from splitting at the edge of the die
    • Leave at least 1/4" (preferably 1/2") edge around the shape to allow for the metal to be formed into the die
    • Can stack two dies and make deeper dishes. Anneal and press multiple times, filling the center of the domed metal with small pieces of urethane and topping it with the urethane sheet.
    • If your upper platen is smaller/narrower than the shape of the die, place a larger spacer on top of the urethane sheet before use to ensure even pressure.
    • Must use with urethane sheet (available separately)
    • Recommended use with 18g or thicker nonferrous metal
    • Watch Kevin's live video on Facebook for instructions on use: https://www.facebook.com/1640860751/videos/3191288137751079/
    • Anneal your metal before use and between pressings to prevent it from splitting at the edge of the die
    • Leave at least 1/4" (preferably 1/2") edge around the shape to allow for the metal to be formed into the die
    • Can stack two dies and make deeper dishes. Anneal and press multiple times, filling the center of the domed metal with small pieces of urethane and topping it with the urethane sheet.
    • If your upper platen is smaller/narrower than the shape of the die, place a larger spacer on top of the urethane sheet before use to ensure even pressure.
    Customers who bought this item also bought

    Dish Former Silhouette Die -3in. Rounded Square

    $40.00
    Brand new! Use this tool to make shallow domed forms, such as trinket dishes, lockets, small containers, etc. 3" x 3" Square with Slightly Rounded Edges 1/4" thick. Must be used with a large sheet of urethane (available separately). ***Will not fit in the discontinued Potter USA medium press***

    Dish Former Silhouette Die -3in. Trillion

    $40.00
    Brand new! Use this tool to make shallow domed forms, such as trinket dishes, lockets, small containers, etc. 3" from point to center of opposite edge. ~2-15/16" from point to point. 1/4" thick. Must be used with a large sheet of urethane (available separately).

    Urethane Sheet for Dish Former Silhouette Dies

    $20.00
    For use only with Dish Former Silhouette Dies. ~4.75" x 4.75" 60-70durometer. Color may vary. 1/4" thick.

    Dish Former Silhouette Die -1.5x2.5in Oval

    $40.00
    Brand new! Use this tool to make shallow domed forms, such as trinket dishes, lockets, small containers, etc. 1-1/2" x 2-1/2" Oval 1/4" thick. Must be used with a large sheet of urethane (available separately).

    Aluminum Spacer (4.5” x 7.75” x 1”)

    $34.75
    This spacer is 4.5'' x 7.75'' and 1'' thick. Non magnetic Spacers are used in the press to lessen the amount of effort needed to extend the jack and activate the items being used in the press. Top and bottom platens are not meant to touch - it will cause the jack to overextend and cause leaking, or for jack to fail. Always use spacers on lower platen to take up space between platens.

    Out of stock