Dish Former Silhouette Die - 3in. Hamsa

Brand new! Use this tool to make shallow domed forms, such as trinket dishes, lockets, small containers, etc. 2-1/2" wide x 3" tall. Overall die size 4-7/8" x 4-7/16". Coordinated to work with the Pancake Die -Hamsa SKU: PD 1548 1/4" thick. Must be used with a large sheet of urethane (available separately). ***Will not fit in the discontinued Potter USA medium press***

SKU: SD-DF-018

Must use with urethane sheet (available separately)
Recommended use with 18g or thicker nonferrous metal
Watch Kevin's live video on Facebook for instructions on use: https://www.facebook.com/1640860751/videos/3191288137751079/
Anneal your metal before use and between pressings to prevent it from splitting at the edge of the die
Leave at least 1/4" (preferably 1/2") edge around the shape to allow for the metal to be formed into the die
Can stack two dies and make deeper dishes. Anneal and press multiple times, filling the center of the domed metal with small pieces of urethane and topping it with the urethane sheet.
If your upper platen is smaller/narrower than the shape of the die, place a larger spacer on top of the urethane sheet before use to ensure even pressure.

$40.00

$32.00

increase decrease

Availability: In stock

Ship to

Shipping Method

Estimated Delivery

Price

No shipping options

Overview

Must use with urethane sheet (available separately)
Recommended use with 18g or thicker nonferrous metal
Watch Kevin's live video on Facebook for instructions on use: https://www.facebook.com/1640860751/videos/3191288137751079/
Anneal your metal before use and between pressings to prevent it from splitting at the edge of the die
Leave at least 1/4" (preferably 1/2") edge around the shape to allow for the metal to be formed into the die
Can stack two dies and make deeper dishes. Anneal and press multiple times, filling the center of the domed metal with small pieces of urethane and topping it with the urethane sheet.
If your upper platen is smaller/narrower than the shape of the die, place a larger spacer on top of the urethane sheet before use to ensure even pressure.

Customers who bought this item also bought

Pancake Die 1548 Hamsa

PD 1548

3-3/16" wide x 3-1/2". Overall die size measurements 7-3/4" x 5-3/16". Coordinated to work with DF018 Dish Former Silhouette Die Hamsa. Will not fit in the discontinued medium PotterUSA press.

$44.25 $35.40

Urethane Sheet for Dish Former Silhouette Dies

DFUrethane

For use only with Dish Former Silhouette Dies. ~4.75" x 4.75" 60-70 durometer. Color may vary. 1/4" thick.

$20.00 $16.00

Pancake Die 1621 - 3.5" Bird

PD 1621

Design: 3-1/2"from side to side, 2-3/4" tall Die itself: 7-1/4" x 5-1/2" Coordinated to work with the 3" Bird Dish Former Silhouette Die. ***Will not fit in the discontinued Potter USA medium press***

$44.25 $35.40

Dish Former Silhouette Die - 3" Bird

SD-DF-026

Brand new! Use this tool to make shallow domed forms, such as trinket dishes, lockets, small containers, etc. 3" wide x 2-1/4" tall, 1/4" thick. Must be used with a large sheet of urethane (available separately). ***Will not fit in the discontinued Potter USA medium press***

$40.00 $32.00

Dish Former Silhouette Die - Mandala 2-13/16"

SD-DF-009

Brand new! Use this tool to make shallow domed forms, such as trinket dishes, box lids, small containers, etc. 2-13/16" diameter. 1/4" thick. Must be used with a large sheet of urethane (available separately). ***Will not fit in the discontinued Potter USA medium press*** Meant to be paired with Pancake Die 1300B. Sample by Lynette Andreasen.

$40.00 $32.00

Urethane Pieces

Bag of 10 pieces of urethane for use with impression dies. 95 durometer sheet. Pieces range from approximately 1/2 inch squares. Thickness of each piece is 1/4 inch. Note: These will fray, crack and deform with use, but you will get many uses from them.

$8.50 $6.80