Close
(0) items
You have no items in your shopping cart.
All Categories
    Filters
    Preferences
    Search

    Dish Former Silhouette Die - 3in. Geometric 5-Pointed Shape

    $40.00
    $30.00
    Brand new! Use this tool to make shallow domed forms, such as trinket dishes, lockets, small containers, etc. 3" diameter. Coordinated to work with the Pancake Die - Geometric 5-Pointed Shape SKU: PD 1536 1/4" thick. Outside measurements of die: 4-7/8" x 4-3/4" Must be used with a large sheet of urethane (available separately). ***Will not fit in the discontinued Potter USA medium press***
    SKU: SD-DF-021
    Ship to
    *
    *
    Shipping Method
    Name
    Estimated Delivery
    Price
    No shipping options
    Availability: In stock
    • Must use with urethane sheet (available separately)
    • Recommended use with 18g or thicker nonferrous metal
    • Watch Kevin's live video on Facebook for instructions on use: https://www.facebook.com/1640860751/videos/3191288137751079/
    • Anneal your metal before use and between pressings to prevent it from splitting at the edge of the die
    • Leave at least 1/4" (preferably 1/2") edge around the shape to allow for the metal to be formed into the die
    • Can stack two dies and make deeper dishes. Anneal and press multiple times, filling the center of the domed metal with small pieces of urethane and topping it with the urethane sheet.
    • If your upper platen is smaller/narrower than the shape of the die, place a larger spacer on top of the urethane sheet before use to ensure even pressure.
    • Must use with urethane sheet (available separately)
    • Recommended use with 18g or thicker nonferrous metal
    • Watch Kevin's live video on Facebook for instructions on use: https://www.facebook.com/1640860751/videos/3191288137751079/
    • Anneal your metal before use and between pressings to prevent it from splitting at the edge of the die
    • Leave at least 1/4" (preferably 1/2") edge around the shape to allow for the metal to be formed into the die
    • Can stack two dies and make deeper dishes. Anneal and press multiple times, filling the center of the domed metal with small pieces of urethane and topping it with the urethane sheet.
    • If your upper platen is smaller/narrower than the shape of the die, place a larger spacer on top of the urethane sheet before use to ensure even pressure.
    Customers who bought this item also bought

    Urethane Pieces

    UP
    $6.38 $8.50
    Bag of 10 pieces of urethane for use with impression dies. 95 durometer sheet. Pieces range from approximately 1/2 inch squares. Thickness of each piece is 1/4 inch. Note: These will fray, crack and deform with use, but you will get many uses from them.

    Pancake Die 1538 3.5" Sakura Blossom

    PD 1538
    $41.25 $55.00
    Design: 3-1/2"from center to center of each edge Die itself: 7-3/4" x 5-1/2 Coordinated to work with BOTH the 3" Sakura Blossom Silhouette Die. SKU: SD-DF-020, and the 3" Abstracted Sakura Blossom SKU: SD-DF-019. ***Will not fit in the discontinued Potter USA medium press*** ***Will not fit in the discontinued Potter USA medium press***

    Pancake Die 1536 3.5" Geometric 5-Pointed Shape

    PD 1536
    $41.25 $55.00
    Design: 3-1/2"from center to center of each edge Die itself: 7-3/4" x 5-1/2 Coordinated to work with the 3" Sakura Blossom Silhouette Die. SKU: SD-DF-021 ***Will not fit in the discontinued Potter USA medium press***

    Aluminum Spacer (4.5” x 7.75” x 1”)

    Al-Spacer
    $26.06 $34.75
    This spacer is 4.5'' x 7.75'' and 1'' thick. Non magnetic Spacers are used in the press to lessen the amount of effort needed to extend the jack and activate the items being used in the press. Top and bottom platens are not meant to touch - it will cause the jack to overextend and cause leaking, or for jack to fail. Always use spacers on lower platen to take up space between platens.

    Dish Former Silhouette Die - 3in. Sakura Blossom

    SD-DF-020
    $30.00 $40.00
    Brand new! Use this tool to make shallow domed forms, such as trinket dishes, lockets, small containers, etc. 3" diameter. Coordinated to work with Pancake Die 1538 Sakura Blossom 1/4" thick. Die Outer Measurements: 4-7/8" x 4-3/4" Must be used with a large sheet of urethane (available separately). ***Will not fit in the discontinued Potter USA medium press***