Dish Former Silhouette Die - 2.75" Arabesque 8

Use this tool to make shallow domed forms, such as trinket dishes, lockets, small containers, etc. Dish -3-7/8" x 2-7/16" Die itself - 4-11/16" wide x 3-7/8" tall, 1/4" thick. Must be used with a large sheet of urethane (available separately). ***Will not fit in the discontinued Potter USA medium press***
SKU: SD-DF-039
  • Must use with urethane sheet (available separately)
  • Recommended use with 18g or thicker nonferrous metal
  • Watch video on Facebook for instructions on use: https://www.facebook.com/1640860751/videos/3191288137751079/
  • Anneal your metal before use and between pressings to prevent it from splitting at the edge of the die
  • Leave at least 1/4" (preferably 1/2") edge around the shape to allow for the metal to be formed into the die
  • Can stack two dies and make deeper dishes. Anneal and press multiple times, filling the center of the domed metal with small pieces of urethane and topping it with the urethane sheet.
  • If your upper platen is smaller/narrower than the shape of the die, place a larger spacer on top of the urethane sheet before use to ensure even pressure.
$40.00
increase decrease
Availability: In stock
Ship to
*
*
Shipping Method
Name
Estimated Delivery
Price
No shipping options
  • Must use with urethane sheet (available separately)
  • Recommended use with 18g or thicker nonferrous metal
  • Watch video on Facebook for instructions on use: https://www.facebook.com/1640860751/videos/3191288137751079/
  • Anneal your metal before use and between pressings to prevent it from splitting at the edge of the die
  • Leave at least 1/4" (preferably 1/2") edge around the shape to allow for the metal to be formed into the die
  • Can stack two dies and make deeper dishes. Anneal and press multiple times, filling the center of the domed metal with small pieces of urethane and topping it with the urethane sheet.
  • If your upper platen is smaller/narrower than the shape of the die, place a larger spacer on top of the urethane sheet before use to ensure even pressure.
Customers who bought this item also bought

Dish Former Silhouette Die - 3in. Hexagon

SD-DF-015
Brand new! Use this tool to make shallow domed forms, such as trinket dishes, lockets, small containers, etc. 2-5/8" wide from center of each side. 3" wide from point to point. Overall die size 4-7/8" x 4-1/2". Coordinated to work with the Pancake Die - Hexagon SKU: PD 1539 1/4" thick. Must be used with a large sheet of urethane (available separately). ***Will not fit in the discontinued Potter USA medium press***
$40.00

Pancake Die 1539 Hexagon

PD 1539
3-1/16" wide (from the center of each side), 3-1/2" wide from point to point. Overall die size measurements 7-1/2" x 5-1/2". Coordinated to work with DF015 Dish Former Silhouette Die Hexagon. Will not fit in the discontinued medium PotterUSA press.
$44.25

Dish Former Silhouette Die - 2.5in. Circle

SD-DF-001
Brand new! Use this tool to make shallow domed forms, such as trinket dishes, lockets, small containers, etc. 2-1/2" diameter. 1/4" thick. Must be used with a large sheet of urethane (available separately). Pairs well with PD661A
$40.00

Urethane Sheet for Dish Former Silhouette Dies

DFUrethane
For use only with Dish Former Silhouette Dies. ~4.75" x 4.75" 60-70 durometer. Color may vary. 1/4" thick.
$20.00

Urethane Pieces

UP
Bag of 10 pieces of urethane for use with impression dies. 95 durometer sheet. Pieces range from approximately 1/2 inch squares. Thickness of each piece is 1/4 inch. Note: These will fray, crack and deform with use, but you will get many uses from them.
$8.50

Pancake Die 1893 - 4" Arabesque 8

PD 1893
Design: 4" x 2-1/2" Die itself: 7" x 5-7/8" Coordinated to work with the Arabesque 8 Dish Former Silhouette Die (DF-038). ***Will not fit in the discontinued Potter USA medium press***
$44.25