Customers who bought this item also bought
Bezel Die Tool 5mm Round
BDP-R005
This bezel die tool will create as many 5mm round bezels as you'd like to press in your hydraulic press. Recommended for 22 ga. fine silver. The size of disc you start with for the 5mm bezel die is a 10mm disc. The interior bezel height after pressing is ~3mm. You can adjust the height to fit your specific stone.
$86.00
Aluminum Spacer (4.5" x 7.75"x1/2")
Al-SpacerThin
This spacer measures 7-3/4" in length, 4-1/2" in width, and is 1/2" thick. It is nonmagnetic. Spacers are used in the press to lessen the amount of effort needed to extend the jack and activate the items being used in the press. Top and bottom platens are not meant to touch - it will cause the jack to overextend and cause leaking, or for jack to fail. Always use spacers on lower platen to take up space between platens.
$28.50
Wire Former Mount
WFMount
This mount is meant to be used with our wire-forming tools. Each wire-forming tool includes two mounting holes that fit securely onto the pegs in this mount. The mount has two holes where it can be secured to a work surface with screws. Once attached to a work surface, each wire-forming tool can be dropped down onto the mount and held securely in place with the pegs. Changing out tools is as easy as lifting the wire former off the pegs and replacing it with a different wire former. The mount measures 5" x 2". Wire forming tools SOLD SEPARATELY.
$25.00
Ear Wire Former No. 3: Kidney
EWF3
This easy-to-use ear wire jig makes it easy to make repeatable, consistently sized kidney-style ear wires. This tool is NOT used in a hydraulic press. Finished ear wire is approx. 7/8" long, 3/8" wide, and features an outward bend in the end of the wire and catch for a secure hold. The loop is approx. 3mm diameter. Recommended for use with half-hard 20g wire.
$84.00
Quick-Form Press Anticlastic Spinner Ring Former
QF-SpltAntRing
Make spinner rings quickly and easily! Use ONLY with the Quick-Form Press and wedge-shaped Urethane Pusher. Must use with Small Tooling Adapter (included with press purchase). Mount to Tool Mounting Plate at 2nd & 4th holes. Use no washers with Urethane Pusher. Widest diameter: 3/4". Narrowest diameter: 1/2". Max ring width: 3/8". Ring size range: ~5-10+
$55.00