Pancake Die PD-T142 Mini Moon and Star Pair

Moon: 9.4 x 6.5mm. Star: 9 x 9mm. Die: 2-3/8" x 4-5/8". Designed to work with the Tortolita and Rincon presses!
SKU: PD T142

This pancake die works in Potter USA’s Tortolita and Rincon hydraulic presses, as well as with any press with a wide enough working surface. If you’re using it with the Tortolita press, you will need a minimum of 4 aluminum spacers.

Tips for Trimming: After cutting the blank, use a jeweler’s saw to remove the tab connecting the two designs. If needed, use the metal you remove after cutting the blank as a guide to trace the design onto the tab as a guideline for sawing.

$27.50
increase decrease
Availability: In stock
Ship to
*
*
Shipping Method
Name
Estimated Delivery
Price
No shipping options

This pancake die works in Potter USA’s Tortolita and Rincon hydraulic presses, as well as with any press with a wide enough working surface. If you’re using it with the Tortolita press, you will need a minimum of 4 aluminum spacers.

Tips for Trimming: After cutting the blank, use a jeweler’s saw to remove the tab connecting the two designs. If needed, use the metal you remove after cutting the blank as a guide to trace the design onto the tab as a guideline for sawing.

Products specifications
Attribute nameAttribute value
Press CompatibilityTortolita, Rincon
Products specifications
Attribute nameAttribute value
Press CompatibilityTortolita, Rincon
Customers who bought this item also bought

Pancake Die PD-T139 Leaf and Flower Pair

PD T139
Leaf: 11 x 7.25mm. Flower: 9.5 x 9.5mm. Die: 2-3/8" x 4-5/8". Designed to work with the Tortolita and Rincon presses!
$27.50

Pancake Die PD-T143 Mini Saguaro Pair

PD T143
Design: 11 x 7.5mm each. Die: 2-3/8" x 4-5/8". Designed to work with the Tortolita and Rincon presses!
$27.50

Pancake Die PD-T144 Rain Cloud Pair

PD T144
Raindrop: 9 x 5mm. Cloud: 6 x 10.25mm. Die: 2-3/8" x 4-5/8". Designed to work with the Tortolita and Rincon presses!
$27.50

Tortolita - Aluminum Spacers Set of 2

TORT-Al-Spacer
THESE ARE SMALL AND ONLY INTENDED FOR THE TORTOLITA PRESS. 2 Aluminum Spacers machined to fit inside the Tortolita Press. 3" x 2-7/16 x 1/2"
$15.00

Aluminum Spacer (4.5” x 7.75” x 1”)

Al-Spacer
This spacer is 4.5'' x 7.75'' and 1'' thick. Non magnetic Spacers are used in the press to lessen the amount of effort needed to extend the jack and activate the items being used in the press. Top and bottom platens are not meant to touch - it will cause the jack to overextend and cause leaking, or for jack to fail. Always use spacers on lower platen to take up space between platens.
$39.75

Copper Sheet 20 Gauge 5" x 8"

CS 20
Plain copper sheet, 20 gauge. 5 inch x 8 inch piece CDA #110; 99.9% pure
$14.00