Previous productPancake Die PD-T122 Rectang...
Next productPancake Die PD-T124 Trillio...

Pancake Die PD-T123 Trillion 12mm

Trillion: 12 x 12mm diameter Die: ~2-3/8" x 4-5/8". Designed to work with the Tortolita and Rincon presses!
SKU: PD T123

This pancake die works in Potter USA’s Tortolita and Rincon hydraulic presses, as well as with any press with a wide enough working surface. If you’re using it with the Tortolita press, you will need a minimum of 4 aluminum spacers.

Tips for Trimming: After cutting the blank, use a jeweler’s saw to remove the tab. If needed, use the metal you remove after cutting the blank as a guide to trace the design onto the tab as a guideline for sawing.

$27.50
increase decrease
Availability: In stock
Ship to
*
*
Shipping Method
Name
Estimated Delivery
Price
No shipping options

This pancake die works in Potter USA’s Tortolita and Rincon hydraulic presses, as well as with any press with a wide enough working surface. If you’re using it with the Tortolita press, you will need a minimum of 4 aluminum spacers.

Tips for Trimming: After cutting the blank, use a jeweler’s saw to remove the tab. If needed, use the metal you remove after cutting the blank as a guide to trace the design onto the tab as a guideline for sawing.

Customers who bought this item also bought
Picture of Aluminum Spacer (4.5” x 7.75” x 1”)

Aluminum Spacer (4.5” x 7.75” x 1”)

Al-Spacer
This spacer is 4.5'' x 7.75'' and 1'' thick. Non magnetic Spacers are used in the press to lessen the amount of effort needed to extend the jack and activate the items being used in the press. Top and bottom platens are not meant to touch - it will cause the jack to overextend and cause leaking, or for jack to fail. Always use spacers on lower platen to take up space between platens.
$34.75
Picture of Pancake Die PD-T121 Rectangle-6x12mm

Pancake Die PD-T121 Rectangle-6x12mm

PD T121
Rectangle: 6 x 12mm diameter Die: ~2-3/8" x 4-5/8". Designed to work with the Tortolita and Rincon presses!
$27.50
Picture of Aluminum Spacer (4.5" x 7.75"x1/2")

Aluminum Spacer (4.5" x 7.75"x1/2")

Al-SpacerThin
This spacer measures 7-3/4" in length, 4-1/2" in width, and is 1/2" thick. It is nonmagnetic. Spacers are used in the press to lessen the amount of effort needed to extend the jack and activate the items being used in the press. Top and bottom platens are not meant to touch - it will cause the jack to overextend and cause leaking, or for jack to fail. Always use spacers on lower platen to take up space between platens.
$21.50
Picture of Pancake Die Opener

Pancake Die Opener

PDopener
Pancake Die Opener
$14.00
Picture of Pancake Die Bracelet B031 Basic Cuff Bracelet

Pancake Die Bracelet B031 Basic Cuff Bracelet

PD B031
1.5" H x 6" W. Die itself is 7 7/16" x 4 29/32". Use die sideways in press with extended platens or press about 1/2 the die at a time. ***Will not fit in the discontinued Potter USA medium press***
$44.25
Picture of Pancake Die 1325 Scalloped Diamond

Pancake Die 1325 Scalloped Diamond

PD 1325
Design: 1-1/8" H x 1-3/4" W Die: 4-3/16" H x 3-1/8" W
$27.50