Copper Stamping "Tiny Laurel" (3 for $15!)

Approx. 20 gauge (due to supply challenges gauges may vary) Design: 25/32" or 20mm NOTE: Each stamping is made in-house, one-at-a-time, using vintage tools and processes. The detail in each stamping may vary, and a stamping with less detail is not considered defective.

Approx. 20 gauge (due to supply challenges gauges may vary) Design: 5/8" x 5/8" x 26mm x 26mm NOTE: Each stamping is made in-house, one-at-a-time, using vintage tools and processes. The detail in each stamping may vary, and a stamping with less detail is not considered defective.

This Coil Cutter Kit is for use with a #30 Foredom flex shaft handpiece only. Kit includes: Aluminum 6" long koil holder block and steel top plate for holder; Saw blade, guard for Foredom #30 Flexshaft handpiece with adapter bushing, 1 saw arbor to fit 3/8" hole blades. Coils to be cut can be up to 4 inches long and 7/8 inch (22 mm) in outside diameter. Coils may be made of 12 through 30 gauge wire.

Set 28 of mandrels. Sizes range from 3/32" to 1/2" by 64ths of an inch. NOTE: Current mandrels don't include notches at base. Simply insert your wire into the chuck with the mandrel, and make sure the wire is secured in the jaws before winding. The notch isn't necessary.