Copper Stamping "Gothic Petals" (3 for $10!)

Approx. 20 gauge (due to supply challenges gauges may vary) Design: 1-1/2" x 1-1/4" NOTE: Each stamping is made in-house, one-at-a-time, using vintage tools and processes. The detail in each stamping may vary, and a stamping with less detail is not considered defective.

Approx. 20 gauge (due to supply challenges gauges may vary) Design: 7/8" x 13/16" with 3mm setting NOTE: Each stamping is made in-house, one-at-a-time, using vintage tools and processes. The detail in each stamping may vary, and a stamping with less detail is not considered defective.

This easy-to-use ear wire jig makes it easy to make repeatable, consistently sized shepherd’s hook-style ear wires. See long description for instructions, and watch the video below (coming soon)! This tool is NOT used in a hydraulic press. Finished ear wire is approx. 25mm long, 10.5mm wide, and features an outward bend in the end of the wire to help secure it in the ear when worn. The loop is approx. 3mm diameter. Recommended for use with 20g wire with a balled-up end.

Copper Sheet 18 Gauge 5" x8". Fully hard CDA # 110; 99.9% PURE.