Impression Die Mandala

$64.00

This die must be used in a hydraulic press. Please see below for how to use this die-READ BEFORE PURCHASING. This die measures 1-1/2 diameter Former Sku (KP001)

SKU: KP-G408

Ship to

Shipping Method

Name

Estimated Delivery

Price

No shipping options

Availability: In stock

Available until: 5/1/2024 12:00 AM

Approximate Time Left:

Qty:

Overview

This die must be used in a hydraulic press.

This die measures 1 1/2 diameter

Matching Pancake Die can be found at: Pancake Die 1300 Mandala

PLEASE READ: This video shows a small pusher that we used to sell. WE NO LONGER SELL THIS PUSHER, as we have found our standard 2" tool-steel pusher works just as well and is safer. To use this die effectively, you must use THICK, annealed metal. We suggest no thinner than 16- or 18-gauge. Place the die centered under the tool steel pusher, place your metal on the die, and press. DO NOT TOUCH OR MOVE YOUR METAL. Rotate the die, press again, and repeat 8-10 times. Rotating the die and pressing so many times ensures that you will even press the metal into the die. After pressing, cut out the mandala with PD1300, if desired, or saw it out by hand.

This die must be used in a hydraulic press.

This die measures 1 1/2 diameter

Matching Pancake Die can be found at: Pancake Die 1300 Mandala

Customers who bought this item also bought

Urethane Pieces

$8.50

Bag of 10 pieces of urethane for use with impression dies. 95 durometer sheet. Pieces range from approximately 1/2 inch squares. Thickness of each piece is 1/4 inch. Note: These will fray, crack and deform with use, but you will get many uses from them.

Aluminum Spacer (4.5” x 7.75” x 1”)

Al-Spacer

$34.75

This spacer is 4.5'' x 7.75'' and 1'' thick. Non magnetic Spacers are used in the press to lessen the amount of effort needed to extend the jack and activate the items being used in the press. Top and bottom platens are not meant to touch - it will cause the jack to overextend and cause leaking, or for jack to fail. Always use spacers on lower platen to take up space between platens.

Pancake Die R1184 Wide Cigar Band

PD R1184

$30.50

Design: 3" long x 7/16" at narrowest, and 1 1/4" at widest. Die itself: 4 15/32" x 4 1/16". Customer demo: Nancy Norwood