Pancake Die 591 Small Spear

$27.50

Pancake Die - Small Spear 1-1/16 inches wide by 1/2 inch. Die itself 4-7/16" x 3-5/16". Sample earrings by Lynette Andreasen

SKU: PD 591

Ship to

Shipping Method

Name

Estimated Delivery

Price

No shipping options

Availability: In stock

Qty:

Overview

Potter USA Pancake Die Information:

The pancake dies are designed to cut non-ferrous metal (copper, silver, brass, gold, nickel) 20 gauge and thicker to about 16 gauge.
They work best when the metal is hard. If the metal is too soft, you will get a burr and it will be difficult to remove your part from the die. DO NOT ANNEAL METAL FIRST.
The dies only work in one direction - with words FACE DOWN
I will send them to you pre-sprung so that you know where to put the metal.
If you use metal that is too thick or too thin, it is possible to damage the die.
As long as you stay within the recommended gauges, the dies should last you many years under normal use.

Potter USA Pancake Die Information:

The pancake dies are designed to cut non-ferrous metal (copper, silver, brass, gold, nickel) 20 gauge and thicker to about 16 gauge.
They work best when the metal is hard. If the metal is too soft, you will get a burr and it will be difficult to remove your part from the die. DO NOT ANNEAL METAL FIRST.
The dies only work in one direction - with words FACE DOWN
I will send them to you pre-sprung so that you know where to put the metal.
If you use metal that is too thick or too thin, it is possible to damage the die.
As long as you stay within the recommended gauges, the dies should last you many years under normal use.

Customers who bought this item also bought

Pancake Die 590 Medium Spear

PD 590

$27.50

Design: 1 -5/16" x 5/8" Die itself: 4-9/16"" X 3-3/8" Sample earrings by Lynette Andreasen

Pancake Die 707 Small Teardrop

PD 707

$27.50

Design: ~1" x ~1/2" Die itself: 3" x 4-1/8"

Pancake Die 708 Medium Teardrop

PD 708

$27.50

Teardrop Pancake Die Medium 1 1/8" long, and 11/16" at widest point

Aluminum Spacer (4.5” x 7.75” x 1”)

Al-Spacer

$34.75

This spacer is 4.5'' x 7.75'' and 1'' thick. Non magnetic Spacers are used in the press to lessen the amount of effort needed to extend the jack and activate the items being used in the press. Top and bottom platens are not meant to touch - it will cause the jack to overextend and cause leaking, or for jack to fail. Always use spacers on lower platen to take up space between platens.

Pancake Die 715 Small Trillion

PD 715

$27.50

Pancake Die Small Trillion 5/8" x 5/8"