This bundle includes TWO pancake dies that together make a sweet little dog. PD 1870 creates the legs and PD 1869 creates the head/tail. PD1870 Shape measurements: 1-7/8" x 15/16" PD1870 Die measurements: 6-3/8" x 3-5/16" PD1869 Total Shape Measurements: 2-1/4" x 1-1/2" Head Measurements: 1-3/8" x 1-1/4" Tail Measurements: 1-1/4" x 7/16" PD1869 Die measurements: 5-7/8" x 4-1/4"

Design- 2-3/4" x 13/16". Overall die measurements- 7-1/4" x 3-3/8"

Design Size: 2 x 6-3/4"

Design Size: approximately 2-7/8" x 1/4" Designed for use in a rolling mill.

Design Size: approximately 2" x 6-7/8" Designed for use in a rolling mill. Sample earrings by Lynette Andreasen

Overall size: 2" x 6-7/8".

Set of coordinating pancake die and silhouette die Pancake die (PD1884): Design 2" x 2-5/8". Die 6-1/2" x 4-1/2". Silhouette Die (SD329): 13/16" x 2". 3" diameter.

Design Size: approximately 3-1/8" x 9/16" Designed for use in a rolling mill.

Design: 3-1/2"from center to center of each edge Die itself: 7-7/8" x 5-1/2 Coordinated to work with the 3" Rounded Square Dish Former Silhouette Die. ***Will not fit in the discontinued Potter USA medium press***

Cat: 8 x 10mm. Dog: 9.5 x 11mm. Die: 2-3/8" x 4-5/8". Designed to work with the Tortolita and Rincon presses!

Cat: 10.5 x 7.5mm. Dog: 13 x 8mm. Die: 2-3/8" x 4-5/8". Designed to work with the Tortolita and Rincon presses!

Raindrop: 9 x 5mm. Cloud: 6 x 10.25mm. Die: 2-3/8" x 4-5/8". Designed to work with the Tortolita and Rincon presses!

Triangle: 9 x 7.5mm. Marquise: 9 x 4mm. Die: 2-3/8" x 4-5/8". Designed to work with the Tortolita and Rincon presses!

Leaf: 11 x 7.25mm. Flower: 9.5 x 9.5mm. Die: 2-3/8" x 4-5/8". Designed to work with the Tortolita and Rincon presses!

Overall size: 2" x 6-7/8".

Overall size: 2" x 6-7/8".

This FSS die perfectly matches Pancake Die 1219A. Design: 1" x 7/8" (25.4mm x 22.225mm) Die Set Includes: Die Top, with precision-welded cutter Die Bottom, with precision-registered center hole and metal guide marks on bottom- and right-side edges to assist in lining up metal in the die Urethane: Specific to each die set; not interchangeable with other designs. Color may vary. The components of each Die set are not interchangeable with other die sets, but all can be used with a single, standard Die Shoe.

2" x ~6-7/8". Previously sold as part of the Magnetism bundle.

2" x ~6-7/8".

This die must be used in a Hydraulic Press. The design measures 2.5" long x 5/8" wide. Overall die measures 5" x 4.5"

3" x 1-13/16"

Overall size: 2" x 6-7/8". Each design: 1-8/16" x 1-7/16"

Lg.: 47 x 23.5mm each. Med.: 35.7 x 19.4mm each. Sm.: 20 x 11.5mm each.

This ring is 3" long and 2" at its widest point in the center. This die must be used in a hydraulic press. Customer demo: Piper Lane Davis **FORMERLY R1200**

Design: 1-7/8" x 1-1/8" Die Set Includes: Die Top, with precision-welded cutter Die Bottom, with precision-registered center hole and metal guide marks on bottom- and right-side edges to assist in lining up metal in the die Urethane: Specific to each die set; not interchangeable with other designs. Color may vary. The components of each Die set are not interchangeable with other die sets, but all can be used with a single, standard Die Shoe. MUST BE USED WITH THE FSS DIE SHOE (available separately) Watch Kevin demonstrate how to use this die: https://youtu.be/7Gl-ShVKtlk

Design: 1-1/2" x 7/8" Die Set Includes: Die Top, with precision-welded cutter Die Bottom, with precision-registered center hole and metal guide marks on bottom- and right-side edges to assist in lining up metal in the die Urethane: Specific to each die set; not interchangeable with other designs. Color may vary. The components of each Die set are not interchangeable with other die sets, but all can be used with a single, standard Die Shoe. MUST BE USED WITH THE STANDARD FSS DIE SHOE (available separately) Watch Kevin demonstrate how to use this die: https://youtu.be/7Gl-ShVKtlk

Design: 1-1/4" x 7/8"(31mm x 23mm) Die Set Includes: Die Top, with precision-welded cutter Die Bottom, with precision-registered center hole and metal guide marks on bottom- and right-side edges to assist in lining up metal in the die Urethane: Specific to each die set; not interchangeable with other designs. Color may vary. The components of each Die set are not interchangeable with other die sets, but all can be used with a single, standard Die Shoe.

Design: 1-5/8" x 1"(42mm x 25mm) Die Set Includes: Die Top, with precision-welded cutter Die Bottom, with precision-registered center hole and metal guide marks on bottom- and right-side edges to assist in lining up metal in the die Urethane: Specific to each die set; not interchangeable with other designs. Color may vary. The components of each Die set are not interchangeable with other die sets, but all can be used with a single, standard Die Shoe.

Design: 1-1/4" x 1-1/4" Die Set Includes: Die Top, with precision-welded cutter Die Bottom, with precision-registered center hole and metal guide marks on bottom- and right-side edges to assist in lining up metal in the die Urethane: Specific to each die set; not interchangeable with other designs. Color may vary. The components of each Die set are not interchangeable with other die sets, but all can be used with a single, standard Die Shoe. MUST BE USED WITH THE STANDARD FSS DIE SHOE (available separately) Watch Kevin demonstrate how to use this die: https://youtu.be/7Gl-ShVKtlk

Moon: 9.4 x 6.5mm. Star: 9 x 9mm. Die: 2-3/8" x 4-5/8". Designed to work with the Tortolita and Rincon presses!

Design Size: approximately 2-15/16" x 1/4" Designed for use in a rolling mill.

This curved shield pancake die, for use in a hydraulic press, cuts metal blanks and is a versatile shape for your jewelry designs. Design: 3/4"H x 31/32"W or 19mm x 24.6mm

This die must be used in a hydraulic press. This die is coordinated to work with PD 1607. The shape measures 7/8" x 3/4". Overall die measures 5.1" x 3.4".

Brand new! Use this tool to make shallow domed forms, such as trinket dishes, lockets, small containers, etc. 3" from point to center of opposite edge. ~2-15/16" from point to point. 1/4" thick. Must be used with a large sheet of urethane (available separately).

Brand new! Use this tool to make shallow domed forms, such as trinket dishes, lockets, small containers, etc. Dish -3.5" wide x 2.5" tall, 1/4" thick. Die itself - 4-1/8" x 4-7/8" Must be used with a large sheet of urethane (available separately). ***Will not fit in the discontinued Potter USA medium press***

Design: 3-1/2"from point to center of opposite edge, 3-3/8" from point to point Die itself: 7-7/8" x 5-3/8 Coordinated to work with the 3" Trillion Shape Dish Former Silhouette Die. ***Will not fit in the discontinued Potter USA medium press***