5 3/4" long and tapered from 5/8" to 1 1/6" wide with rounded ends. Use this to make a bracelet using our formers. *** THIS DIE WILL NOT FIT IN A MEDIUM PRESS ***

Will not fit in a medium press 2" x 2"

This die measures 13/16" tall X 1/2" wide

Brand new! Use this tool to make shallow domed forms, such as trinket dishes, lockets, small containers, etc. Coordinates with the Coffin Pancake Die. Design: 3" x 2" Die Itself: 5"x 4" Thickness: 1/4" thick. Must be used with a large sheet of urethane (available separately). ***Will not fit in the discontinued Potter USA medium press***

Design: 3-1/2" x 2-1/2" Die itself: 8" x 4-1/2" Coordinated to work with the Coffin Dish Former Silhouette Die. ***Will not fit in the discontinued Potter USA medium press***

Make spinner rings quickly and easily! Use ONLY with the Quick-Form Press and wedge-shaped Urethane Pusher. Must use with Small Tooling Adapter (included with press purchase). Mount to Tool Mounting Plate at 2nd & 4th holes. Use no washers with Urethane Pusher. Widest diameter: 3/4". Narrowest diameter: 1/2". Max ring width: 3/8". Ring size range: ~5-10+

This plate is designed to be used in a rolling mill with annealed, non-ferrous metal. Plate Size: ~7" L x 2" W Plate Thickness: ~2.5mm Design Size: 5" W x 1-1/4" L

Design Size: approximately 3" x 15/32" Designed for use in a rolling mill.

Overall size: 2" x 6-7/8". Pattern size is approximately 1-1/8" x 6-3/4".

This die must be used in a hydraulic press. This die measures 1 1/2" x 3/4". Customer example: Karen Swartz

Design: 1-1/4" x 1-3/4". Die: 5-5/8" x 3-11/16".

2" x ~6-7/8". Each panel is approximately 1" wide.

Design: 1-1/8" H x 1-3/4" W Die: 4-3/16" H x 3-1/8" W

This die measures 1 1/16" tall X 7/8" wide

Overall size: 2-13/16" x3/4". Created by Dennis Main on the straight line engraving machine at Potter USA.

State: 2-13/16" x 3". Die: 7-13/16" x 5".

Perfect for post earrings! Rocket: 8.8 x 6.3mm. Planet: 9 x 6.6mm. Designed for use in the Tortolita and Rincon presses!

This die must be used in a hydraulic press. Design: 1-5/16" x 13/16" (34mm x 20mm). Overall die measures 3-3/8" x 5-1/4".

Silhouette die dimensions: 7/8" x 1-1/2" (SD size, 3" diameter)

1 3/16" H x 1 1/8" W

Design: 1" x 3/4" Die Set Includes: Die Top, with precision-welded cutter Die Bottom, with precision-registered center hole and metal guide marks on bottom- and right-side edges to assist in lining up metal in the die Urethane: Specific to each die set; not interchangeable with other designs. Color may vary. The components of each Die set are not interchangeable with other die sets, but all can be used with a single, standard Die Shoe.

This is a ring bending die that fits in the bracelet former frame for the hydraulic press. This will allow you to bend heavy gauge ring shanks with ease! TO BE USED WITH THE BRACELET FORMER FRAME (sold separately). 1 inch diameter

5/8"W x 1 7/16"H or 16mm x 36.5mm This long diamond shape is great as an earring drop

This die must be used in a hydraulic press. This die is coordinated to work with RMP274. Design: 27.5 x 22mm. Overall die measures 3 3/8" x 5 9/16".

This die must be used in a hydraulic press. This die is coordinated to work with PD 1610 and PD 1611. Shape measures 1-3/8" x15/16". Overall die measures 5-5/16" x 3-3/8".

This die must be used in a hydraulic press. This die is coordinated to work with PD 1610 and PD 1612. Shape measures 1-1/4" x 3/8". Overall die measures 5-3/16" x 3-3/8".

This die must be used in a hydraulic press. This die is coordinated to work with PD 1611 and PD 1612. Shape measures 1" x 1/4". Overall die measures 5-1/8" x 3-3/8".

This shape is meant to be folded in half to create a keychain - no need for soldering! Shape - 4-5/16" x 1-1/8" Die itself - 5-5/8" x 6-3/8"

This die must be used in a hydraulic press. This design matches RMP275 Ouija. Design: 15/16" x 13/16". Overall die measures 5-5/16" x 3-3/8".

This die must be used in a hydraulic press. This design matches RMP275. Design: 11/16" x 15/16". Overall die measures 5-5/16" x 3-3/8".

Overall size: 2" x 6-7/8".

Design: 9/16" x 9/16" Die Set Includes: Die Top, with precision-welded cutter Die Bottom, with precision-registered center hole and metal guide marks on bottom- and right-side edges to assist in lining up metal in the die Urethane: Specific to each die set; not interchangeable with other designs. Color may vary. The components of each Die set are not interchangeable with other die sets, but all can be used with a single, standard Die Shoe. MUST BE USED WITH THE STANDARD FSS DIE SHOE (available separately) Watch Kevin demonstrate how to use this die: https://youtu.be/7Gl-ShVKtlk

Circle: 12mm diameter Die: ~2-3/8" x 4-5/8". Designed to work with the Tortolita and Rincon presses!

Circle: 10mm diameter Die: ~2-3/8" x 4-5/8". Designed to work with the Tortolita and Rincon presses!

Design: 7/8" x 9/16" (22 x 14mm). (Same size/shape as PD1491 that's included in the Riveted Shield Earrings Kit.) Die Set Includes: Die Top, with precision-welded cutter Die Bottom, with precision-registered center hole and metal guide marks on bottom- and right-side edges to assist in lining up metal in the die Urethane: Specific to each die set; not interchangeable with other designs. Color may vary. The components of each Die set are not interchangeable with other die sets, but all can be used with a single, standard or high-production Die Shoe. MUST BE USED WITH THE FSS DIE SHOE (available separately) Watch Kevin demonstrate how to use this die: https://youtu.be/7Gl-ShVKtlk

Design: 1-1/4" x 29/32" Die Set Includes: Die Top, with precision-welded cutter Die Bottom, with precision-registered center hole and metal guide marks on bottom- and right-side edges to assist in lining up metal in the die Urethane: Specific to each die set; not interchangeable with other designs. Color may vary. The components of each Die set are not interchangeable with other die sets, but all can be used with a single, standard Die Shoe.