This die can be used to make a lid for the 2" box (made with Pancake Die 1518). Designed to be used with 20 GAUGE SHEET METAL. Cutting area is 3" across each direction at the largest points. The smaller sides are 1/2"" The outer area of the die is 5 1/4" wide x 7 3/4" high. ***Will not fit in the discontinued Potter USA medium press***

This die can be used to make a small box that is 2" x 2" x 1" tall. Designed to be used with 20 GAUGE SHEET METAL. Cutting area is 4" across each direction at the largest points. The smaller sides are 1" The outer area of the die is 7" wide x 8 1/2" high. ***Will not fit in the discontinued Potter USA medium press***

1-3/16" x 7/16"

Design: 1-1/2" x 1-7/32" (38 x 30.7mm) Fan Die Set Includes: Die Top, with precision-welded cutter Die Bottom, with precision-registered center hole and metal guide marks on bottom- and right-side edges to assist in lining up metal in the die Urethane: Specific to each die set; not interchangeable with other designs. Color may vary. The components of each Die set are not interchangeable with other die sets, but all can be used with a single, standard Die Shoe. MUST BE USED WITH THE FSS DIE SHOE (available separately) Watch Kevin demonstrate how to use this die: https://youtu.be/7Gl-ShVKtlk

Design: 1-1/2" x 1" Oval Die Set Includes: Die Top, with precision-welded cutter Die Bottom, with precision-registered center hole and metal guide marks on bottom- and right-side edges to assist in lining up metal in the die Urethane: Specific to each die set; not interchangeable with other designs. Color may vary. The components of each Die set are not interchangeable with other die sets, but all can be used with a single, standard Die Shoe. MUST BE USED WITH THE FSS DIE SHOE (available separately) Watch Kevin demonstrate how to use this die: https://youtu.be/7Gl-ShVKtlk

This measures 1.00" Radius x 1.75" wide This die must be used in a hydraulic press

Learn how to make these earrings! Layer graduated sizes of scribble-textured, asymmetrical triangle blanks with tubes for a kinetic pair of earrings. In this kit, you will receive 3 mirror-image pairs of asymmetrical triangle pancake dies in different sizes, an intricate Scribbles pattern plate, and instructions on how to make the earrings shown in the listing! Pancake Dies: Lg. Pair 11.4 x 9.5mm each. Medium Pair 13.6 x 10.6mm each. Sm. Pair 14.9 x 12mm each. Pattern Plate: 2" x ~6-3/4". ~1/8" thick.

You asked for small pancake dies, and we listened! This mini heart is only 3/8" wide. Due to its size, it requires care when using it to ensure it stays aligned.

1834: Left: 19.8 x 14mm. Right: 14.3 x 16.5mm. Die: 5-1/8" x 3-1/2". 1835: Left: 16.8 x 16.5mm. Right: 20.6 x 13mm. Die: 5-1/8" x 3-3/8".

Matches one of the designs on the Mandala 1 pattern pate (RMP017). Measures 1-5/8"

3/4"H x 1 1/2"W

1/4" x 1-5/8"

Our redesigned pancake dies are here! Die: 4-11/16" H x 3" W Working Area: 1-5/8" H x 2-3/4" W

You asked for small pancake dies, and we listened! This mini butterfly is only 3/8" wide. Due to its size, it requires care when using it to ensure it stays aligned.

This die must be used in a hydraulic press. This die measures 1 3/8"

1 1/4" x 1 1/4"

Design: 20mm Rounded Square Die Set Includes: Die Top, with precision-welded cutter Die Bottom, with precision-registered center hole and metal guide marks on bottom- and right-side edges to assist in lining up metal in the die Urethane: Specific to each die set; not interchangeable with other designs. Color may vary. The components of each Die set are not interchangeable with other die sets, but all can be used with a single, standard Die Shoe. MUST BE USED WITH THE FSS DIE SHOE (available separately) Watch Kevin demonstrate how to use this die: https://youtu.be/7Gl-ShVKtlk

Design: 11 x 7.5mm each. Die: 2-3/8" x 4-5/8". Designed to work with the Tortolita and Rincon presses!

Set of coordinating pancake die and silhouette die Pancake die (PD1858): Design 3/4" x 1". Die 5-3/8" x 3-5/16". Silhouette die (SD323): Design 1/2" x 3/4". 2" diameter.

Design: 15/16" x 5/8" Die Set Includes: Die Top, with precision-welded cutter Die Bottom, with precision-registered center hole and metal guide marks on bottom- and right-side edges to assist in lining up metal in the die Urethane: Specific to each die set; not interchangeable with other designs. Color may vary. The components of each Die set are not interchangeable with other die sets, but all can be used with a single, standard Die Shoe. MUST BE USED WITH THE FSS DIE SHOE (available separately) Watch Kevin demonstrate how to use this die: https://youtu.be/7Gl-ShVKtlk

Overall Design Size: approximately 2" x 6-7/8". Each symbol is a 3/4" diameter circle. Designed for use in a rolling mill.

Design Size: approximately 2-15/16" x 5/16" Designed for use in a rolling mill.

Design Size: approximately 2-15/16" x 1/4" Designed for use in a rolling mill.

This die must be used in a hydraulic press This die measures 5/8" x 5/8"

This die must be used in a hydraulic press This die measures 1" x 1"

Overall Design Size: approximately 2" x 7" Designed for use in a rolling mill.

Medium tapered bracelet 6" long, widest part 1 1/8" tapering down to 1/2 " This pattern has different sizes, great for layering! *** THIS DIE WILL NOT FIT IN A MEDIUM PRESS ***

This die is to make a ring shank that then has a 16mm circle opening to place a stone and bezel. At longest tips it is 3 1/8". Skinniest point is 1/4" H, and tallest points (at ends) is 1 1/4" High.

7/8"H x 3 1/4"W or 22.2mm x 82.5mm

Bracelet Die B001B Tapered Bracelet 6 1/2" x 1 1/4" *** THIS DIE WILL NOT FIT IN A MEDIUM PRESS ***

This die measures 3 3/4" long x 1/4" wide

1 1/8"H x 3 9/16"W or 28.6mm x 90.5mm

7/8" x 3 1/2" or 22mm x 89mm

1-1/4" x 15/16", Die itself: 5-5/16" x 3-3/8".

1/4" x 3 5/8"

State: 1-15/16" x 3". Die: 7-15/16" x 3-7/8".