Design: 13/32" x 1-9/32" (10mm x 32mm) Die Set Includes: Die Top, with precision-welded cutter Die Bottom, with precision-registered center hole and metal guide marks on bottom- and right-side edges to assist in lining up metal in the die Urethane: Specific to each die set; not interchangeable with other designs. Color may vary. The components of each Die set are not interchangeable with other die sets, but all can be used with a single, standard Die Shoe.

Brand new! Use this tool to make shallow domed forms, such as trinket dishes, lockets, small containers, etc. 3" from point to center of opposite edge. ~2-15/16" from point to point. 1/4" thick. Must be used with a large sheet of urethane (available separately).

Brand new! Use this tool to make shallow domed forms, such as trinket dishes, lockets, small containers, etc. Dish -3.5" wide x 2.5" tall, 1/4" thick. Die itself - 4-1/8" x 4-7/8" Must be used with a large sheet of urethane (available separately). ***Will not fit in the discontinued Potter USA medium press***

Design: 3-1/2"from point to center of opposite edge, 3-3/8" from point to point Die itself: 7-7/8" x 5-3/8 Coordinated to work with the 3" Trillion Shape Dish Former Silhouette Die. ***Will not fit in the discontinued Potter USA medium press***

This pancake die matches a design on pattern plate RMP386. 47 x 20.7mm. Die: 5-1/4" x 3-5/8".

This pancake die matches a design on pattern plate RMP386. 44.5 x 21.7mm. Die: 5-1/4" x 3-5/8".

Design: 3-1/2" x 2-1/2" Die itself: 7" x 5-1/2" Coordinated to work with the 3" Crescent Moon Dish Former Silhouette Die (DF-038). ***Will not fit in the discontinued Potter USA medium press***

Overall Design Size: approximately 2" x 6-7/8". Designed for use in a rolling mill.

This shape, a smaller version of a bracelet pancake die we offer, is the perfect size for an average-size barrette. Great for making a matched set. 4-1/4" x 15/16"

This shape, a smaller version of a bracelet pancake die we offer, is the perfect size for an average-size barrette. Great for making a matched set. 4-3/16" x 1-3/8"

Design: 1-1/16" x 5/8" Die Set Includes: Die Top, with precision-welded cutter Die Bottom, with precision-registered center hole and metal guide marks on bottom- and right-side edges to assist in lining up metal in the die Urethane: Specific to each die set; not interchangeable with other designs. Color may vary. The components of each Die set are not interchangeable with other die sets, but all can be used with a single, standard Die Shoe. MUST BE USED WITH THE FSS DIE SHOE (available separately) Watch Kevin demonstrate how to use this die: https://youtu.be/7Gl-ShVKtlk

Design: 1-1/4" Circle Tag Shape w/Tab for a Jump Ring Die Set Includes: Die Top, with precision-welded cutter Die Bottom, with precision-registered center hole and metal guide marks on bottom- and right-side edges to assist in lining up metal in the die Urethane: Specific to each die set; not interchangeable with other designs. Color may vary. The components of each Die set are not interchangeable with other die sets, but all can be used with a single, standard Die Shoe. MUST BE USED WITH THE FSS DIE SHOE (available separately) Watch Kevin demonstrate how to use this die: https://youtu.be/7Gl-ShVKtlk

Design: 1-1/4" x 7/8" Die Set Includes: Die Top, with precision-welded cutter Die Bottom, with precision-registered center hole and metal guide marks on bottom- and right-side edges to assist in lining up metal in the die Urethane: Specific to each die set; not interchangeable with other designs. Color may vary. The components of each Die set are not interchangeable with other die sets, but all can be used with a single, standard Die Shoe.

This is for narrow Synclastic Bracelets. 7/8" wide, 1-15/16"" radius. This is for one former, not a set.

Silhouette die dimensions: 9/16" x 1" (SD size, 2" diameter)

Brand new! Use this tool to make shallow domed forms, such as trinket dishes, lockets, small containers, etc. 3" x 3" Square with Slightly Rounded Edges 1/4" thick. Must be used with a large sheet of urethane (available separately). ***Will not fit in the discontinued Potter USA medium press***

This feather pancake die turns a complicated design into a simple shape for use in hydraulic presses. Design: 1" x 3/8"

7"L x 2"W or 177.8mm x 50.8mm

Overall Design Size: approximately 2" x 6-7/8". Designed for use in a rolling mill.

Pancake Die 814 Jumbo Heart 2" x 1 3/4"

This plate is designed to be used in a rolling mill with annealed, non-ferrous metal. Plate Size: ~7" L x 2" W Plate Thickness: ~2.5mm Design Size: 1-1/2" Diameter (each mandala) Customer demo: Paula Mion

Overall Design Size: approximately 2" x 6-7/8". Each ring is 1/4" tall x 3". Designed for use in a rolling mill.

Overall Design Size: approximately 2" x 7" Designed for use in a rolling mill.

Overall Design Size: approximately 2" x 7" Designed for use in a rolling mill.

This pattern plate features three different mermaids, each perfect for a large pendant, plaque, or box top! 1-3/4" diameter each

Overall size: 2" x 6-7/8".

This pancake die matches a design on pattern plate RMP385. 21.4 x 32.6mm. Die: 5" x 3-3/8".

This pancake die matches a design on pattern plate RMP385. 15.5 x 32.6mm. Die: 5-1/16" x 3-3/8".

Learn how to make these Riveted Shield Earrings with a tube-lined hole and ear wire that stays put! In this kit, you will receive a versatile, shield pancake die, an intricate linen-texture pattern plate, and instructions on how to make the earrings shown in the listing! BONUS bracelet instructions included! Pancake Die: 7/8" x 9/16" (22 x 14mm). Pattern Plate: 2" x 7-7/8", approx. 1/8" thick.

Bundle includes RMP159 and PD1502. Each domed hemisphere shape is 3/4" tall x ~1-1/2" wide. Each circle is 1/2" diameter. Pancake Die PD1502: Hemisphere 3/4" tall x 1-1/2" wide. Matches Project Plate #3. Matching circle pancake die available separately.

Design Size: approximately 2" x 6-7/8". Designed for use in a rolling mill. Sample earrings made by Erin Greenberg (shibori plate and the large guitar pick pancake and silhouette die bundle) https://potterusa.com/pancake-silhouette-die-bundle-large-guitar-pick

This bundle includes TWO pancake dies that together make a sweet little bow. PD1679 creates the loop shape of the bow and PD1680 creates the ribbon portion of the bow. PD1679 Shape measurements: 2-1/4" x 1/2" PD1679 Die measurements: 4" x 5" PD1680 Shape Measurements: 1" x 3/4" PD1680 Die measurements: 3-7/16" x 5-1/2" Customer samples by Karyn Fawcett

Set of coordinating pancake die and silhouette die Pancake die design dimensions (PD1882): 2-3/4" x 1-1/4". (Die itself: 6-1/4" x 4-3/8"). Silhouette die design dimensions (SD327): 1-1/2" x 1". (Die itself: 2" Diameter).

1522-B Triangle Box Base: 1 1/2" Base x 3/4" Tall Walls 1522-T Triangle Box Top: 1 9/16" Base x 1/4" Tall Walls * Makes finished box bottom that is 1 1/2" across and 3/4" tall and the lid is 1 1/2" across and 1/4" deep Designed to be used with 20 GAUGE SHEET METAL.

Overall Design Size: approximately 2" x 6-7/8". Designed for use in a rolling mill.

This simple flower design has the versatile capacity to make detailed botanical jewelry designs. Design: 1" diameter Please note: This die requires some deburring after stamped out, use flush cutters and file.