1522-B Triangle Box Base: 1 1/2" Base x 3/4" Tall Walls 1522-T Triangle Box Top: 1 9/16" Base x 1/4" Tall Walls * Makes finished box bottom that is 1 1/2" across and 3/4" tall and the lid is 1 1/2" across and 1/4" deep Designed to be used with 20 GAUGE SHEET METAL.

Overall Design Size: approximately 2" x 6-7/8". Designed for use in a rolling mill.

This simple flower design has the versatile capacity to make detailed botanical jewelry designs. Design: 1" diameter Please note: This die requires some deburring after stamped out, use flush cutters and file.

Design: 1" x 1" Die Set Includes: Die Top, with precision-welded cutter Die Bottom, with precision-registered center hole and metal guide marks on bottom- and right-side edges to assist in lining up metal in the die Urethane: Specific to each die set; not interchangeable with other designs. Color may vary. The components of each Die set are not interchangeable with other die sets, but all can be used with a single, standard Die Shoe. MUST BE USED WITH THE FSS DIE SHOE (available separately) Watch Kevin demonstrate how to use this die: https://youtu.be/7Gl-ShVKtlk

Design Size: approximately 2" x 6-7/8" Designed for use in a rolling mill.

Overall Design Size: approximately 2" x 6-7/8". Designed for use in a rolling mill.

Design: 7/8" diameter Circle Die Set Includes: Die Top, with precision-welded cutter Die Bottom, with precision-registered center hole and metal guide marks on bottom- and right-side edges to assist in lining up metal in the die Urethane: Specific to each die set; not interchangeable with other designs. Color may vary. The components of each Die set are not interchangeable with other die sets, but all can be used with a single, standard Die Shoe. MUST BE USED WITH THE FSS DIE SHOE (available separately) Watch Kevin demonstrate how to use this die: https://youtu.be/7Gl-ShVKtlk

Design: 5/8" diameter Circle Die Set Includes: Die Top, with precision-welded cutter Die Bottom, with precision-registered center hole and metal guide marks on bottom- and right-side edges to assist in lining up metal in the die Urethane: Specific to each die set; not interchangeable with other designs. Color may vary. The components of each Die set are not interchangeable with other die sets, but all can be used with a single, standard Die Shoe. MUST BE USED WITH THE FSS DIE SHOE (available separately) Watch Kevin demonstrate how to use this die: https://youtu.be/7Gl-ShVKtlk

Design: 3/4" diameter Circle Die Set Includes: Die Top, with precision-welded cutter Die Bottom, with precision-registered center hole and metal guide marks on bottom- and right-side edges to assist in lining up metal in the die Urethane: Specific to each die set; not interchangeable with other designs. Color may vary. The components of each Die set are not interchangeable with other die sets, but all can be used with a single, standard Die Shoe. MUST BE USED WITH THE FSS DIE SHOE (available separately) Watch Kevin demonstrate how to use this die: https://youtu.be/7Gl-ShVKtlk

Design: 1-3/4" diameter Circle Die Set Includes: Die Top, with precision-welded cutter Die Bottom, with precision-registered center hole and metal guide marks on bottom- and right-side edges to assist in lining up metal in the die Urethane: Specific to each die set; not interchangeable with other designs. Color may vary. The components of each Die set are not interchangeable with other die sets, but all can be used with a single, standard Die Shoe. MUST BE USED WITH THE FSS DIE SHOE (available separately) Watch Kevin demonstrate how to use this die: https://youtu.be/7Gl-ShVKtlk

Design Size: approximately 2-15/16" x 5/16" Designed for use in a rolling mill.

Design Size: approximately 2-7/8" x 5/16" Designed for use in a rolling mill.

~7/16" x ~3" (11.3 x 75.4mm). For use in a rolling mill.

Design: 1-3/4" x 1-5/16" Die Set Includes: Die Top, with precision-welded cutter Die Bottom, with precision-registered center hole and metal guide marks on bottom- and right-side edges to assist in lining up metal in the die Urethane: Specific to each die set; not interchangeable with other designs. Color may vary. The components of each Die set are not interchangeable with other die sets, but all can be used with a single, standard Die Shoe. MUST BE USED WITH THE FSS DIE SHOE (available separately) Watch Kevin demonstrate how to use this die: https://youtu.be/7Gl-ShVKtlk

Design: 1-1/8" x 15/16" Die Set Includes: Die Top, with precision-welded cutter Die Bottom, with precision-registered center hole and metal guide marks on bottom- and right-side edges to assist in lining up metal in the die Urethane: Specific to each die set; not interchangeable with other designs. Color may vary. The components of each Die set are not interchangeable with other die sets, but all can be used with a single, standard Die Shoe. MUST BE USED WITH THE FSS DIE SHOE (available separately) Watch Kevin demonstrate how to use this die: https://youtu.be/7Gl-ShVKtlk

Design: 46.6 x 28mm Heart (Same size as PD 701R) Die Set Includes: Die Top, with precision-welded cutter Die Bottom, with precision-registered center hole and metal guide marks on bottom- and right-side edges to assist in lining up metal in the die Urethane: Specific to each die set; not interchangeable with other designs. Color may vary. The components of each Die set are not interchangeable with other die sets, but all can be used with a single, standard Die Shoe. MUST BE USED WITH THE FSS DIE SHOE (available separately) Watch Kevin demonstrate how to use this die: https://youtu.be/7Gl-ShVKtlk

Design Size: approximately 3" x 15/32" Designed for use in a rolling mill.

~7/16" x ~3" (10.7 x 74.8mm). For use in a rolling mill.

Design Size: approximately 3" x 3/8" (72mm x 9.5mm) Designed for use in a rolling mill.

Design Size: approximately 3" x 3/8" (72mm x 9.5mm) Designed for use in a rolling mill.

Overall size: 3-3/8" x 1". Design size: 3" x 5/16"

~7/16" x ~3" (11.3 x 75.4mm). For use in a rolling mill.

Ring is 3 inches wide (long) x .25" thick band with oval section is 1" thick.

Matches one of the designs on the pattern plate from the December 2023 Subscription Box! (plate not available separately) 10 x 33.5mm.

Matches one of the designs on the pattern plate from the December 2023 Subscription Box! (plate not available separately) 18 x 40mm.

Matches one of the designs on the pattern plate from the December 2023 Subscription Box! (plate not available separately) 10 x 31mm.

This die measures 1 1/16" tall X 13/16" wide

This flower is one of the pancake dies that needs deburring on the back after cutting it out with the pancake die with flush cutters. Design: 1.9" diameter

Make the most adorable woodland mushroom pendants and earrings with this fun pancake die. Design: 1" tall x 15/16" wide Die Itself: 5-3/8" x 3-3/8"

Overall Design Size: approximately 2" x 7" Designed for use in a rolling mill.

Design: 15/16" x 3/4" Original design by Byrd Moss.

Ornate snowflake pancake design for use in a hydraulic press. Design: 2 12/16" diameter

1" x 2"

1" x 1-5/16"

Design is 5-5/8" x 1-1/16", Overall Plate measurements are 7"x2", designed for use in a rolling mill. Sample bracelet made by Kelsey Malin.

Design: 7" long x 2" wide x ~1/18" thick