Fine silver sheet, 20 gauge. 3" x 3" Square, ~49 grams

Design Size: approximately 2" x 6-7/8". Designed for use in a rolling mill. Sample earrings made by Erin Greenberg (shibori plate and the large guitar pick pancake and silhouette die bundle) https://potterusa.com/pancake-silhouette-die-bundle-large-guitar-pick

Approx. 16 gauge (Due to supply challenges, gauge may vary.) Design: 1-1/4” diameter NOTE: Each stamping is made in house, one at a time, using vintage tools and processes. The detail in each stamping may vary, and a stamping with less detail is not considered defective.

Overall Design Size: approximately 2" x 6-7/8". Designed for use in a rolling mill.

Design: 1" x 1" Die Set Includes: Die Top, with precision-welded cutter Die Bottom, with precision-registered center hole and metal guide marks on bottom- and right-side edges to assist in lining up metal in the die Urethane: Specific to each die set; not interchangeable with other designs. Color may vary. The components of each Die set are not interchangeable with other die sets, but all can be used with a single, standard Die Shoe. MUST BE USED WITH THE FSS DIE SHOE (available separately) Watch Kevin demonstrate how to use this die: https://youtu.be/7Gl-ShVKtlk

Design Size: approximately 2" x 6-7/8" Designed for use in a rolling mill.

Overall Design Size: approximately 2" x 6-7/8". Designed for use in a rolling mill.

Design: 7/8" diameter Circle Die Set Includes: Die Top, with precision-welded cutter Die Bottom, with precision-registered center hole and metal guide marks on bottom- and right-side edges to assist in lining up metal in the die Urethane: Specific to each die set; not interchangeable with other designs. Color may vary. The components of each Die set are not interchangeable with other die sets, but all can be used with a single, standard Die Shoe. MUST BE USED WITH THE FSS DIE SHOE (available separately) Watch Kevin demonstrate how to use this die: https://youtu.be/7Gl-ShVKtlk

Design: 5/8" diameter Circle Die Set Includes: Die Top, with precision-welded cutter Die Bottom, with precision-registered center hole and metal guide marks on bottom- and right-side edges to assist in lining up metal in the die Urethane: Specific to each die set; not interchangeable with other designs. Color may vary. The components of each Die set are not interchangeable with other die sets, but all can be used with a single, standard Die Shoe. MUST BE USED WITH THE FSS DIE SHOE (available separately) Watch Kevin demonstrate how to use this die: https://youtu.be/7Gl-ShVKtlk

Design: 3/4" diameter Circle Die Set Includes: Die Top, with precision-welded cutter Die Bottom, with precision-registered center hole and metal guide marks on bottom- and right-side edges to assist in lining up metal in the die Urethane: Specific to each die set; not interchangeable with other designs. Color may vary. The components of each Die set are not interchangeable with other die sets, but all can be used with a single, standard Die Shoe. MUST BE USED WITH THE FSS DIE SHOE (available separately) Watch Kevin demonstrate how to use this die: https://youtu.be/7Gl-ShVKtlk

Design: 1-3/4" diameter Circle Die Set Includes: Die Top, with precision-welded cutter Die Bottom, with precision-registered center hole and metal guide marks on bottom- and right-side edges to assist in lining up metal in the die Urethane: Specific to each die set; not interchangeable with other designs. Color may vary. The components of each Die set are not interchangeable with other die sets, but all can be used with a single, standard Die Shoe. MUST BE USED WITH THE FSS DIE SHOE (available separately) Watch Kevin demonstrate how to use this die: https://youtu.be/7Gl-ShVKtlk

Design Size: approximately 2-15/16" x 5/16" Designed for use in a rolling mill.

Design Size: approximately 2-7/8" x 5/16" Designed for use in a rolling mill.

~7/16" x ~3" (11.3 x 75.4mm). For use in a rolling mill.

Design: 1-3/4" x 1-5/16" Die Set Includes: Die Top, with precision-welded cutter Die Bottom, with precision-registered center hole and metal guide marks on bottom- and right-side edges to assist in lining up metal in the die Urethane: Specific to each die set; not interchangeable with other designs. Color may vary. The components of each Die set are not interchangeable with other die sets, but all can be used with a single, standard Die Shoe. MUST BE USED WITH THE FSS DIE SHOE (available separately) Watch Kevin demonstrate how to use this die: https://youtu.be/7Gl-ShVKtlk

Design: 1-1/8" x 15/16" Die Set Includes: Die Top, with precision-welded cutter Die Bottom, with precision-registered center hole and metal guide marks on bottom- and right-side edges to assist in lining up metal in the die Urethane: Specific to each die set; not interchangeable with other designs. Color may vary. The components of each Die set are not interchangeable with other die sets, but all can be used with a single, standard Die Shoe. MUST BE USED WITH THE FSS DIE SHOE (available separately) Watch Kevin demonstrate how to use this die: https://youtu.be/7Gl-ShVKtlk

Design: 46.6 x 28mm Heart (Same size as PD 701R) Die Set Includes: Die Top, with precision-welded cutter Die Bottom, with precision-registered center hole and metal guide marks on bottom- and right-side edges to assist in lining up metal in the die Urethane: Specific to each die set; not interchangeable with other designs. Color may vary. The components of each Die set are not interchangeable with other die sets, but all can be used with a single, standard Die Shoe. MUST BE USED WITH THE FSS DIE SHOE (available separately) Watch Kevin demonstrate how to use this die: https://youtu.be/7Gl-ShVKtlk

~7/16" x ~3" (10.7 x 74.8mm). For use in a rolling mill.

Design Size: approximately 3" x 3/8" (72mm x 9.5mm) Designed for use in a rolling mill.

Design Size: approximately 3" x 3/8" (72mm x 9.5mm) Designed for use in a rolling mill.

Overall size: 3-3/8" x 1". Design size: 3" x 5/16"

~7/16" x ~3" (11.3 x 75.4mm). For use in a rolling mill.

Fine silver sheet, 18 gauge. 3" x 6", ~121 grams

Use ONLY with the Quick-Form Press and Urethane Pusher. Large: 2" diameter. Mount to Tool Mounting Plate at 4th hole. Small: 1-1/2" diameter. 1-1/4" forming width. Must use with Small Tooling Adapter (included with press purchase). Mount to Tool Mounting Plate at 3rd & 5th holes. Use two washers with Urethane Pusher for Small Flat Former.

Matches one of the designs on the pattern plate from the December 2023 Subscription Box! (plate not available separately) 10 x 33.5mm.

Matches one of the designs on the pattern plate from the December 2023 Subscription Box! (plate not available separately) 18 x 40mm.

Matches one of the designs on the pattern plate from the December 2023 Subscription Box! (plate not available separately) 10 x 31mm.

Make the most adorable woodland mushroom pendants and earrings with this fun pancake die. Design: 1" tall x 15/16" wide Die Itself: 5-3/8" x 3-3/8"

Overall Design Size: approximately 2" x 7" Designed for use in a rolling mill.

Overall Design Size: approximately 2" x 6-7/8". Each band is approximately 15mm wide. Designed for use in a rolling mill.

Overall Design Size: approximately 2" x 6-7/8". Designed for use in a rolling mill.

An assortment of 10 small pieces of aluminum (sizes vary) that can be used to create a force when pressing impression dies. Sizes will vary from 1/2" - 1". Forces work best when the aluminum is pressed hot. ALWAYS CENTER YOUR WORK. Watch the following videos to see Kevin demonstrating how these work: https://www.facebook.com/groups/1253577991351417/?multi_permalinks=7886112968097853&ref=share AND https://www.facebook.com/1640860751/videos/807686980360120/

This option is for LAYAWAY Payment for the NEW Rincon Press. Manual: $995 Electric: $3,045 This is our newest, most compact, and most economical 20-ton jewelry hydraulic press. This press will work with pancake dies, impression dies, silhouette dies, and even our bracelet-forming frame.

This butterfly has smooth, slightly rounded wings that give this design a soft, silken quality. The circles on the wings resemble the "eyes" of a Blue Pansy butterfly and can hold stones or enamel. Turn this butterfly into a hairpin, pendant, brooch, and more! From Rumart in Providence, Rhode Island. Design: 2-1/16" x 29/32" with 4mm settings for stones or enamel

Approx. 14 gauge sterling silver (due to supply challenges gauges may vary) Design: 2-1/2" x 1/4" NOTE: Each stamping is made in-house, one-at-a-time, using vintage tools and processes. The detail in each stamping may vary, and a stamping with less detail is not considered defective.

Approx. 16 gauge (Due to supply challenges, gauge may vary.) Design: 15/16" diameter NOTE: Each stamping is made in house, one at a time, using vintage tools and processes. The detail in each stamping may vary, and a stamping with less detail is not considered defective.