Design: 1-1/2" x 7/8" Die Set Includes: Die Top, with precision-welded cutter Die Bottom, with precision-registered center hole and metal guide marks on bottom- and right-side edges to assist in lining up metal in the die Urethane: Specific to each die set; not interchangeable with other designs. Color may vary. The components of each Die set are not interchangeable with other die sets, but all can be used with a single, standard Die Shoe. MUST BE USED WITH THE STANDARD FSS DIE SHOE (available separately) Watch Kevin demonstrate how to use this die: https://youtu.be/7Gl-ShVKtlk

Design: 1-1/4" x 7/8"(31mm x 23mm) Die Set Includes: Die Top, with precision-welded cutter Die Bottom, with precision-registered center hole and metal guide marks on bottom- and right-side edges to assist in lining up metal in the die Urethane: Specific to each die set; not interchangeable with other designs. Color may vary. The components of each Die set are not interchangeable with other die sets, but all can be used with a single, standard Die Shoe.

Design: 1-5/8" x 1"(42mm x 25mm) Die Set Includes: Die Top, with precision-welded cutter Die Bottom, with precision-registered center hole and metal guide marks on bottom- and right-side edges to assist in lining up metal in the die Urethane: Specific to each die set; not interchangeable with other designs. Color may vary. The components of each Die set are not interchangeable with other die sets, but all can be used with a single, standard Die Shoe.

Design: 1-1/4" x 1-1/4" Die Set Includes: Die Top, with precision-welded cutter Die Bottom, with precision-registered center hole and metal guide marks on bottom- and right-side edges to assist in lining up metal in the die Urethane: Specific to each die set; not interchangeable with other designs. Color may vary. The components of each Die set are not interchangeable with other die sets, but all can be used with a single, standard Die Shoe. MUST BE USED WITH THE STANDARD FSS DIE SHOE (available separately) Watch Kevin demonstrate how to use this die: https://youtu.be/7Gl-ShVKtlk

Moon: 9.4 x 6.5mm. Star: 9 x 9mm. Die: 2-3/8" x 4-5/8". Designed to work with the Tortolita and Rincon presses!

These simple circular bezels come from Tercat. Top: 19/32" x 19/32" with a 8mm center Right: 17/32" x 17/32" with a 7mm center Left: 17/32" diameter

This shot plate includes three impression dies that can be used with any dies included in our "Gothic Mix" shot plate series! Try it out! Top Left: 5/16" x 5/16" with a 3mm center Top Right: 13/16" x 3/8" with a 13mm x 5.5mm center Bottom Left: 713/32" x 13/32" with a 6mm x 6mm center Bottom Right: 9/16" x 3/8" with a 10mm x 4mm center

Design Size: approximately 2-15/16" x 1/4" Designed for use in a rolling mill.

From Breuning. Design: 3/4" x 5/8" with a 14mm x 11mm center

Brand new! Use this tool to make shallow domed forms, such as trinket dishes, lockets, small containers, etc. Dish -3.5" wide x 2.5" tall, 1/4" thick. Die itself - 4-1/8" x 4-7/8" Must be used with a large sheet of urethane (available separately). ***Will not fit in the discontinued Potter USA medium press***

Approx. 16 gauge (Due to supply challenges, gauge may vary.) Design: 1" x 1-13/16" NOTE: Each stamping is made in house, one at a time, using vintage tools and processes. The detail in each stamping may vary, and a stamping with less detail is not considered defective.

This pancake die matches a design on pattern plate RMP386. 47 x 20.7mm. Die: 5-1/4" x 3-5/8".

This pancake die matches a design on pattern plate RMP386. 44.5 x 21.7mm. Die: 5-1/4" x 3-5/8".

5/8" x 7/16"

This ribbon design has several stone settings. From the Parisi Tool & Die Co. Design: 15/16" x 15/32" with 1mm settings

Overall Design Size: approximately 2" x 6-7/8". Designed for use in a rolling mill.

This shape, a smaller version of a bracelet pancake die we offer, is the perfect size for an average-size barrette. Great for making a matched set. 4-1/4" x 15/16"

This shape, a smaller version of a bracelet pancake die we offer, is the perfect size for an average-size barrette. Great for making a matched set. 4-3/16" x 1-3/8"

7/8" x 9/16"

This little crown can make a pendant, a pair of earrings, a charm, and more. From Parisi Tools out of Providence, Rhode Island. Design: 3/4" x 3/4"

Design: 1-1/4" x 7/8" Die Set Includes: Die Top, with precision-welded cutter Die Bottom, with precision-registered center hole and metal guide marks on bottom- and right-side edges to assist in lining up metal in the die Urethane: Specific to each die set; not interchangeable with other designs. Color may vary. The components of each Die set are not interchangeable with other die sets, but all can be used with a single, standard Die Shoe.

2" x ~6-7/8".

2" x ~6-7/8".

2" x ~6-7/8".

2" x ~6-7/8".

2" x ~6-7/8".

From Silveri. Design: 15/16" x 3/4" with a 9.5mm center

Please read the FULL DESCRIPTION below before purchasing. Named after one of the mountain ranges that surround Potter USA, the Rincon Press is our newest, most compact, and most economical jewelry hydraulic press. This press will work with pancake dies, impression dies, silhouette dies, and even our bracelet-forming frame.

From Gold Machinery. Design: 11/16" diameter

These wall mounted organizers hold impression dies, pancake dies and pattern plates. Milled and made all in house of solid hard maple. Each organizer is is 20" long x 2-1/4". Each organizer holds up to 15 tools.

Overall Design Size: approximately 2" x 6-7/8". Designed for use in a rolling mill.

Overall Design Size: approximately 2" x 6-7/8". Each ring is 1/4" tall x 3". Designed for use in a rolling mill.

Overall Design Size: approximately 2" x 7" Designed for use in a rolling mill.

Overall Design Size: approximately 2" x 7" Designed for use in a rolling mill.

Approx. 16 gauge sterling silver (due to supply challenges gauges may vary) Design: 36.3 x 46.2mm NOTE: Each stamping is made in-house, one-at-a-time, using vintage tools and processes. The detail in each stamping may vary, and a stamping with less detail is not considered defective.

Overall size: 2" x 6-7/8".