Design: 1" Circle Tag Shape w/Tab for a Jump Ring Die Set Includes: Die Top, with precision-welded cutter Die Bottom, with precision-registered center hole and metal guide marks on bottom- and right-side edges to assist in lining up metal in the die Urethane: Specific to each die set; not interchangeable with other designs. Color may vary. The components of each Die set are not interchangeable with other die sets, but all can be used with a single, standard Die Shoe. MUST BE USED WITH THE FSS DIE SHOE (available separately) Watch Kevin demonstrate how to use this die: https://youtu.be/7Gl-ShVKtlk

1" x 9/16" (25mm x 15mm) Die: 5-3/16" x 3-3/8" This die is coordinated to work with the smaller shapes on Pattern Plate RMP287 Boho Leaves.

Overall Design Size: approximately 2" x 7" Designed for use in a rolling mill.

Overall size: 2" x 6-7/8".

Design: 1-5/6" x 1-3/4" each. Die: 6" x 5-1/2".

Approx. 16 gauge (Due to supply challenges, gauge may vary.) Design: 7/8" x 1-1/4" NOTE: Each stamping is made in house, one at a time, using vintage tools and processes. The detail in each stamping may vary, and a stamping with less detail is not considered defective.

Approx. 16 gauge (Due to supply challenges, gauge may vary.) Design: 1-3/4" diameter NOTE: Each stamping is made in house, one at a time, using vintage tools and processes. The detail in each stamping may vary, and a stamping with less detail is not considered defective.

Approx. 16 gauge (Due to supply challenges, gauge may vary.) Design: 5/8" x 7/16" NOTE: Each stamping is made in house, one at a time, using vintage tools and processes. The detail in each stamping may vary, and a stamping with less detail is not considered defective.

Overall Design Size: approximately 2" x 6-7/8". Designed for use in a rolling mill.

Overall Design Size: approximately 2" x 7" Designed for use in a rolling mill.

Design: Heart 1-1/4" x 1-3/16" Die Set Includes: Die Top, with precision-welded cutter Die Bottom, with precision-registered center hole and metal guide marks on bottom- and right-side edges to assist in lining up metal in the die Urethane: Specific to each die set; not interchangeable with other designs. Color may vary. The components of each Die set are not interchangeable with other die sets, but all can be used with a single, standard Die Shoe. MUST BE USED WITH THE FSS DIE SHOE (available separately) Watch Kevin demonstrate how to use this die: https://youtu.be/7Gl-ShVKtlk

Here's your chance to get a few pattern plates at a great rate! You will receive 3 different pattern plates selected at random. The selection MAY include monthly box designs. Original retail value is $108+. Plates may have some flash rust on the surface. ** NO PICKING, NO EXCHANGES, NO RETURNS- SOLD AS IS. Grab bag. * SOME DIES MIGHT HAVE SOME RUST. THIS IS 100% SUPERFICIAL, TO CLEAN THEM JUST BUFF IT OFF. IT WILL NOT AFFECT THE PERFORMANCE OF THE DIE

Origin unknown. Design: 15/16" x 13/16" with a 14mm x 13.5mm inside

Approx. 16 gauge (Due to supply challenges, gauge may vary.) Design: 7/8" x 1-1/4" NOTE: Each stamping is made in house, one at a time, using vintage tools and processes. The detail in each stamping may vary, and a stamping with less detail is not considered defective.

Design Size: approximately 2" x 6-7/8" Designed for use in a rolling mill.

Overall size: 2" x 6-7/8". From Left to right: 1-7/16" x 13/16", 1-5/8"x5/8", 1-5/8" x 3/8", 1-1/2" x 13/16", 1-1/2" x 11/16", 1-9/16" x 13/16"

2" x ~6-7/8".

2" x ~6-7/8".

Get three impression dies for the price of one in this Breuning shot plate. Top: 3/8" diameter with a 5.5mm setting Left: 1/4" diameter Right: 5/16" diameter

The Standard Die Shoe is more durable and will last longer than the High-production Die Shoe, due to the smaller size of the hole in the base offering more support to the Die Sets (available separately). Standard Die Shoe OR High-production Die Shoe REQUIRED FOR ALL FSS DIE SETS (available separately)! Die Shoes are interchangeable with different FSS Die Sets. Interchangeable FSS Standard Die Shoe Includes: Base with two sizes of pins to maintain correct indexing and assembly and center hole to assist with metal alignment and for removing cut blanks. Aluminum Pusher Plate with two oversized holes Two springs to place between the top and bottom of the Die Sets (Die Sets available separately) Watch Kevin demonstrate how to use this die: https://youtu.be/7Gl-ShVKtlk

Design: 1-3/16" (30.7mm) Rounded Square Die Set Includes: Die Top, with precision-welded cutter Die Bottom, with precision-registered center hole and metal guide marks on bottom- and right-side edges to assist in lining up metal in the die Urethane: Specific to each die set; not interchangeable with other designs. Color may vary. The components of each Die set are not interchangeable with other die sets, but all can be used with a single, standard Die Shoe. MUST BE USED WITH THE FSS DIE SHOE (available separately) Watch Kevin demonstrate how to use this die: https://youtu.be/7Gl-ShVKtlk

Design: 1-1/4" diameter (31.75mm) Die Set Includes: Die Top, with precision-welded cutter Die Bottom, with precision-registered center hole and metal guide marks on bottom- and right-side edges to assist in lining up metal in the die Urethane: Specific to each die set; not interchangeable with other designs. Color may vary. The components of each Die set are not interchangeable with other die sets, but all can be used with a single, standard Die Shoe. MUST BE USED WITH THE FSS DIE SHOE (available separately) Watch Kevin demonstrate how to use this die: https://youtu.be/7Gl-ShVKtlk

Overall size: 2-13/16" x 5/8" Created by Dennis Main on the straight line engraving machine at Potter USA.

Overall size: 3-3/8" x 1". Design size: 2-13/16" x 1/4"

Overall size: 3-3/8" x 1". Design size: 2-13/16" x 1/4"

From Rumart. Design: 1-1/8" x 7/32" with a wide hexagonal setting

Approx. 16 gauge (Due to supply challenges, gauge may vary.) Design: 15/16" x 1-1/4" NOTE: Each stamping is made in house, one at a time, using vintage tools and processes. The detail in each stamping may vary, and a stamping with less detail is not considered defective.

Approx. 16 gauge (Due to supply challenges, gauge may vary.) Design: 13/16" x 1-7/16" NOTE: Each stamping is made in house, one at a time, using vintage tools and processes. The detail in each stamping may vary, and a stamping with less detail is not considered defective.

Sterling silver sheet, 22 gauge. 3" x 3" Square, ~34 grams

This shot plate includes three delicate jewelry elements all from Larter & Sons. Top: 3/4" x 3/16" Left: 3/4" x 7/16" Right: 3/4" x 7/16"

Tool Steel Magnetic Pusher to be used on impression dies in a hydraulic press. 2" diameter. Approx. 3/4" tall, including 1/4" tool steel face. Attaches to upper platen with a magnet.

Design: 3/4" (20mm) wide x 7/8" (22mm) tall Die Set Includes: Die Top, with precision-welded cutter Die Bottom, with precision-registered center hole and metal guide marks on bottom- and right-side edges to assist in lining up metal in the die Urethane: Specific to each die set; not interchangeable with other designs. Color may vary. The components of each Die set are not interchangeable with other die sets, but all can be used with a single, standard Die Shoe. MUST BE USED WITH THE FSS DIE SHOE (available separately) Watch Kevin demonstrate how to use this die: https://youtu.be/7Gl-ShVKtlk

Design: 1-13/16” x 13/16” (45mm x 20mm) Die Set Includes: Die Top, with precision-welded cutter Die Bottom, with precision-registered center hole and metal guide marks on bottom- and right-side edges to assist in lining up metal in the die Urethane: Specific to each die set; not interchangeable with other designs. Color may vary. The components of each Die set are not interchangeable with other die sets, but all can be used with a single, standard Die Shoe. MUST BE USED WITH THE FSS DIE SHOE (available separately) Watch Kevin demonstrate how to use this die: https://youtu.be/7Gl-ShVKtlk

Design: 13/16" x 13/16" Die Set Includes: Die Top, with precision-welded cutter Die Bottom, with precision-registered center hole and metal guide marks on bottom- and right-side edges to assist in lining up metal in the die Urethane: Specific to each die set; not interchangeable with other designs. Color may vary. The components of each Die set are not interchangeable with other die sets, but all can be used with a single, standard Die Shoe. MUST BE USED WITH THE STANDARD FSS DIE SHOE (available separately) Watch Kevin demonstrate how to use this die: https://youtu.be/7Gl-ShVKtlk

Design: 1-1/8” x 7/8” (29mm x 22mm) Die Set Includes: Die Top, with precision-welded cutter Die Bottom, with precision-registered center hole and metal guide marks on bottom- and right-side edges to assist in lining up metal in the die Urethane: Specific to each die set; not interchangeable with other designs. Color may vary. The components of each Die set are not interchangeable with other die sets, but all can be used with a single, standard Die Shoe. MUST BE USED WITH THE FSS DIE SHOE (available separately) Watch Kevin demonstrate how to use this die: https://youtu.be/7Gl-ShVKtlk

Design: 1" flower Die Set Includes: Die Top, with precision-welded cutter Die Bottom, with precision-registered center hole and metal guide marks on bottom- and right-side edges to assist in lining up metal in the die Urethane: Specific to each die set; not interchangeable with other designs. Color may vary. The components of each Die set are not interchangeable with other die sets, but all can be used with a single, standard Die Shoe. MUST BE USED WITH THE FSS DIE SHOE (available separately) Watch Kevin demonstrate how to use this die: https://youtu.be/7Gl-ShVKtlk