Design: Design Size: 2" x 6-3/4"; ~1/8" thick Cactus outlines will be recessed on your metal; image shown is the plate you will receive.

Design: 1 1/2" H x 1 1/2" W Die: 5 13/16" H x 3 5/16" W

Design: 1 1/4" H x 1 1/4" W Die: 5 1/2" H x 3 5/16" W

Design: 1" H x 1" W Die: 5 3/16" H x 3 5/16" W

Design: 1" H x 1" W Die: 5 1/4" H x 3 3/8" W

Design: Design Size: 2" x 6-3/4"; ~1/8" thick

Here's you chance to get a few pancake dies at a great rate! Original retail value is $80+ ** NO PICKING, NO EXCHANGES, NO RETURNS- SOLD AS IS. Grab bag. * SOME DIES MIGHT HAVE SOME RUST. THIS IS 100% SUPERFICIAL, TO CLEAN THEM JUST BUFF IT OFF. IT WILL NOT AFFECT THE PERFORMANCE OF THE DIE

Design: Design Size: 2" x 6-3/4"; ~1/8" thick

20 gauge copper sheet with 25 pre-cut triangles. Each triangle is 1" x 1". triangles are cut leaving two 1mm tabs. Each triangle easily twists out of the sheet. Each sheet may come with some surface discoloration on the copper. Cutouts will have a slight raised bur on the reverse side.

20 gauge copper sheet with 25 pre-cut ovals. Each oval is 1" x 0.5". Ovals are cut leaving two 1mm tabs. Each oval easily twists out of the sheet. Each sheet may come with some surface discoloration on the copper. Cutouts will have a slight raised bur on the reverse side.

Design: Design Size: 2" x 6-3/4"; ~1/8" thick

Design: 1-1/2" diameter Circle Die Set Includes: Die Top, with precision-welded cutter Die Bottom, with precision-registered center hole and metal guide marks on bottom- and right-side edges to assist in lining up metal in the die Urethane: Specific to each die set; not interchangeable with other designs. Color may vary. The components of each Die set are not interchangeable with other die sets, but all can be used with a single, standard Die Shoe. MUST BE USED WITH THE FSS DIE SHOE (available separately) Watch Kevin demonstrate how to use this die: https://youtu.be/7Gl-ShVKtlk

The Standard Die Shoe is more durable and will last longer than the High-production Die Shoe, due to the smaller size of the hole in the base offering more support to the Die Sets (available separately). Standard Die Shoe OR High-production Die Shoe REQUIRED FOR ALL FSS DIE SETS (available separately)! Die Shoes are interchangeable with different FSS Die Sets. Interchangeable FSS Standard Die Shoe Includes: Base with two sizes of pins to maintain correct indexing and assembly and center hole to assist with metal alignment and for removing cut blanks. Aluminum Pusher Plate with two oversized holes Two springs to place between the top and bottom of the Die Sets (Die Sets available separately) Watch Kevin demonstrate how to use this die: https://youtu.be/7Gl-ShVKtlk

Design: 1-1/2" x 1-7/32" (38 x 30.7mm) Fan Die Set Includes: Die Top, with precision-welded cutter Die Bottom, with precision-registered center hole and metal guide marks on bottom- and right-side edges to assist in lining up metal in the die Urethane: Specific to each die set; not interchangeable with other designs. Color may vary. The components of each Die set are not interchangeable with other die sets, but all can be used with a single, standard Die Shoe. MUST BE USED WITH THE FSS DIE SHOE (available separately) Watch Kevin demonstrate how to use this die: https://youtu.be/7Gl-ShVKtlk

Design: 1-5/16" x 1-5/16" ( 34mm x 34mm) Wavy Square Die Set Includes: Die Top, with precision-welded cutter Die Bottom, with precision-registered center hole and metal guide marks on bottom- and right-side edges to assist in lining up metal in the die Urethane: Specific to each die set; not interchangeable with other designs. Color may vary. The components of each Die set are not interchangeable with other die sets, but all can be used with a single, standard Die Shoe. MUST BE USED WITH THE FSS DIE SHOE (available separately) Watch Kevin demonstrate how to use this die: https://youtu.be/7Gl-ShVKtlk

Set of matching pancake die and silhouette die Pancake die dimensions: 1-9/16" diameter (PD 1300) Silhouette die dimensions: 1-3/16" diameter (SD 245)

Design: 1-3/4" diameter Circle Die Set Includes: Die Top, with precision-welded cutter Die Bottom, with precision-registered center hole and metal guide marks on bottom- and right-side edges to assist in lining up metal in the die Urethane: Specific to each die set; not interchangeable with other designs. Color may vary. The components of each Die set are not interchangeable with other die sets, but all can be used with a single, standard Die Shoe. MUST BE USED WITH THE FSS DIE SHOE (available separately) Watch Kevin demonstrate how to use this die: https://youtu.be/7Gl-ShVKtlk

20 gauge copper sheet with 25 pre-cut heart shapes. Each shape is is 1" wide and 1/2" tall. Shapes are cut leaving two 1mm tabs. Each shape easily twists out of the sheet. Each sheet may come with some surface scratches and discoloration on the copper. Cutouts will have a slight raised bur on the reverse side.

Design Size: 2" x 6-3/4"; ~1/8" thick

Design: 1" diameter circle Die Set Includes: Die Top, with precision-welded cutter Die Bottom, with precision-registered center hole and metal guide marks on bottom- and right-side edges to assist in lining up metal in the die Urethane: Specific to each die set; not interchangeable with other designs. Color may vary. The components of each Die set are not interchangeable with other die sets, but all can be used with a single, standard Die Shoe. MUST BE USED WITH THE FSS DIE SHOE (available separately) Watch Kevin demonstrate how to use this die: https://youtu.be/7Gl-ShVKtlk

This shape, a smaller version of a bracelet pancake die we offer, is the perfect size for an average-size barrette. Great for making a matched set. 4-1/4" x 15/16"

This shape, a smaller version of a bracelet pancake die we offer, is the perfect size for an average-size barrette or as a focal piece in a chain or leather bracelet. Great for making a matched set. 3-1/4" x 1"

This shape, a smaller version of a bracelet pancake die we offer, is the perfect size for an average-size barrette or as a focal piece in a chain or leather bracelet. Great for making a matched set. 3-3/4" x 1-3/16"

This shape, a smaller version of a bracelet pancake die we offer, is the perfect size for an average-size barrette. Great for making a matched set. 4-3/16" x 1-3/8"

Learn how to make these Riveted Shield Earrings with a tube-lined hole and ear wire that stays put! In this kit, you will receive a versatile, shield pancake die, an intricate linen-texture pattern plate, and instructions on how to make the earrings shown in the listing! BONUS bracelet instructions included! Pancake Die: 7/8" x 9/16" (22 x 14mm). Pattern Plate: 2" x 7-7/8", approx. 1/8" thick.

These beeswax tool wraps are excellent for protecting your tools from moisture. Wrap your dies up and protect them from rust while not in use. These large wraps measure approximately 8" x 8" and each pack contains 5 wraps. These wraps come in a black background with multi colored dots, patterned fabric. Perfect for hiding any grease stains.

These beeswax tool wraps are excellent for protecting your tools from moisture. Wrap your dies up and protect them from rust while not in use. These large wraps measure approximately 8" x 8" and each pack contains 5 wraps. These wraps are 100% cotton fabric of black background with multi colored paint splatter. Perfect for hiding any grease stains.

We've brought back this popular design from the January 2017 subscription box, but in a different size! 1-1/4" x 1-1/8" (31.7 x 28.2mm)

We've brought back this popular design from the January 2017 subscription box, but in a different size! 3/4" x 11/16" (18 x 17mm)

We've brought back this popular design from the November 2017 subscription box, but in a different size! 5/8" x 5/8" (16.5 x 16.5mm)

We've brought back this popular design from the November 2017 subscription box, but in a different size! 1-1/16" x 1-1/16" (27.4 x 27.4mm)

We've brought back this popular design from the November 2017 subscription box, but in a different size! 1-5/16" x 1-5/16" (33 x 33mm)

We've brought back this popular design from the October 2017 subscription box, but in a different size! 15/16" x 3/4" (23.2 x 19.1mm)

5/16" x 1-1/4" (9 x 31.9mm)

17/32" x 1-5/8" (13.6 x 42.1mm)

This ultra-fine pattern was made by Kevin on an antique straight-line guilloche machine. The texture is SHALLOW and an exact replica of the guilloche pattern created by the machine. It's a perfect background texture, and is beautiful with transparent enamel. Design Size: 1-9/16" x ~6"; ~1/8" thick