Shopping cart
Search
New
Check out our recently added products!
Copper Stamping "Ringed Hoop" (3 for $10!)
CS109
$10.00 $15.00
Approx. 20 gauge (due to supply challenges gauges may vary) Design: 7/8" x 13/16" with 3mm setting NOTE: Each stamping is made in-house, one-at-a-time, using vintage tools and processes. The detail in each stamping may vary, and a stamping with less detail is not considered defective.
Copper Stamping "Belt End" (3 for $10!)
CS110
$10.00 $15.00
Approx. 20 gauge (due to supply challenges gauges may vary) Design: 1-1/2" x 1-1/4" NOTE: Each stamping is made in-house, one-at-a-time, using vintage tools and processes. The detail in each stamping may vary, and a stamping with less detail is not considered defective.
Pattern Plate RMP249 Bee Swarm
RMP249
$39.00
Overall Design Size: approximately 2" x 6-7/8". Each Bee is 2cm wide x 15mm tall. Designed for use in a rolling mill.
Ring Pattern Plate NMP014 Lattice Ring
NMP014
$20.00
Design Size: approximately 3" x 1/4" Designed for use in a rolling mill.
Ring Pattern Plate NMP015 Iron Scroll
NMP015
$20.00
Design Size: approximately 3" x 1/4" Designed for use in a rolling mill.
Copper Stamping "Silhouette Pendant" (3 for $10!)
CS116
$10.00 $15.00
Approx. 20 gauge (due to supply challenges gauges may vary) Design: 1-1/16" x 9/16" NOTE: Each stamping is made in-house, one-at-a-time, using vintage tools and processes. The detail in each stamping may vary, and a stamping with less detail is not considered defective.
Copper Stamping "Silhouette Link" (3 for $10!)
CS119
$10.00 $15.00
Approx. 20 gauge (due to supply challenges gauges may vary) Design: 15/16" x 3/4" NOTE: Each stamping is made in-house, one-at-a-time, using vintage tools and processes. The detail in each stamping may vary, and a stamping with less detail is not considered defective.
FSS (Fast Stamping System) Die Set FSS-044 Marquise
FSS-044
$70.00
Design: 13/16" x 3/8" (20mm x 10mm) Die Set Includes: Die Top, with precision-welded cutter Die Bottom, with precision-registered center hole and metal guide marks on bottom- and right-side edges to assist in lining up metal in the die Urethane: Specific to each die set; not interchangeable with other designs. Color may vary. The components of each Die set are not interchangeable with other die sets, but all can be used with a single, standard Die Shoe. MUST BE USED WITH THE FSS DIE SHOE (available separately) Watch Kevin demonstrate how to use this die: https://youtu.be/7Gl-ShVKtlk
Pattern Plate RMP254 Dragon Scales
RMP254
$39.00
Overall Design Size: approximately 2" x 6-7/8". Designed for use in a rolling mill.
Pattern Plate RMP256 Birds and Berries
RMP256
$39.00
Overall Design Size: approximately 2" x 6-7/8". Designed for use in a rolling mill.
Pattern Plate RMP258 School of Fish
RMP258
$39.00
Overall Design Size: approximately 2" x 6-7/8". Designed for use in a rolling mill.
Copper Stamping "Taurus" (3 for $10!)
CS140
$10.00 $15.00
Approx. 16 gauge (due to supply challenges gauges may vary). 1" x 5/8" NOTE: Each stamping is made in-house, one-at-a-time, using vintage tools and processes. The detail in each stamping may vary, and a stamping with less detail is not considered defective.
Copper Stamping "Virgo" (3 for $10!)
CS141
$10.00 $15.00
Approx. 16 gauge (due to supply challenges gauges may vary). 1" x 5/8" NOTE: Each stamping is made in-house, one-at-a-time, using vintage tools and processes. The detail in each stamping may vary, and a stamping with less detail is not considered defective.
Copper Stamping "Capricorn" (3 for $10!)
CS142
$10.00 $15.00
Approx. 16 gauge (due to supply challenges gauges may vary). 1" x 5/8" NOTE: Each stamping is made in-house, one-at-a-time, using vintage tools and processes. The detail in each stamping may vary, and a stamping with less detail is not considered defective.
Copper Stamping "Scorpio" (3 for $10!)
CS144
$10.00 $15.00
Approx. 16 gauge (due to supply challenges gauges may vary). 1" x 5/8" NOTE: Each stamping is made in-house, one-at-a-time, using vintage tools and processes. The detail in each stamping may vary, and a stamping with less detail is not considered defective.
Copper Stamping "Libra" (3 for $10!)
CS146
$10.00 $15.00
Approx. 16 gauge (due to supply challenges gauges may vary). 1" x 5/8" NOTE: Each stamping is made in-house, one-at-a-time, using vintage tools and processes. The detail in each stamping may vary, and a stamping with less detail is not considered defective.
Copper Stamping "Aquarius" (3 for $10!)
CS147
$10.00 $15.00
Approx. 16 gauge (due to supply challenges gauges may vary). 1" x 5/8" NOTE: Each stamping is made in-house, one-at-a-time, using vintage tools and processes. The detail in each stamping may vary, and a stamping with less detail is not considered defective.
Copper Stamping "Gemini" (3 for $10!)
CS148
$10.00 $15.00
Approx. 16 gauge (due to supply challenges gauges may vary). 1" x 5/8" NOTE: Each stamping is made in-house, one-at-a-time, using vintage tools and processes. The detail in each stamping may vary, and a stamping with less detail is not considered defective.
Copper Stamping "Sagittarius" (3 for $10!)
CS149
$10.00 $15.00
Approx. 16 gauge (due to supply challenges gauges may vary). 1" x 5/8" NOTE: Each stamping is made in-house, one-at-a-time, using vintage tools and processes. The detail in each stamping may vary, and a stamping with less detail is not considered defective.
Copper Stamping "Leo" (3 for $10!)
CS150
$10.00 $15.00
Approx. 16 gauge (due to supply challenges gauges may vary). 1" x 5/8" NOTE: Each stamping is made in-house, one-at-a-time, using vintage tools and processes. The detail in each stamping may vary, and a stamping with less detail is not considered defective.
Copper Stamping "Aries" (3 for $10!)
CS151
$10.00 $15.00
Approx. 16 gauge (due to supply challenges gauges may vary). 1" x 5/8" NOTE: Each stamping is made in-house, one-at-a-time, using vintage tools and processes. The detail in each stamping may vary, and a stamping with less detail is not considered defective.
Pattern Plate RMP262 Pawin' Around
RMP262
$39.00
Overall Design Size: approximately 2" x 6-7/8". Designed for use in a rolling mill.
Pattern Plate RMP264 Prickly Bands
RMP264
$39.00
Overall Design Size: approximately 2" x 6-7/8". Each band is approximately 15mm wide. Designed for use in a rolling mill.
Pattern Plate RMP265 Fox Coral Tessellation
RMP265
$39.00
Overall Design Size: approximately 2" x 6-7/8". Designed for use in a rolling mill.
Pancake Die 1627 Small Irregular Teardrop
PD 1627
$27.50
Design: 1-5/16" x 1". Die itself: 5-7/8” x 3-3/8”.
Pancake Die 1628 Large Irregular Teardrop
PD 1628
$27.50
Design: 1-3/4" x 1-1/4". Die itself: 6-1/4” x 3-3/8”.
Pancake Die 1630 Truncated Petal-Large
PD 1630
$27.50
Design: 3/4" x 1-1/2". Die itself: 3-3/8" x 6-1/16"
Copper Stamping "Leafy Quatrefoil Jesus" (3 for $10!)
CS153
$10.00 $15.00
Approx. 16 gauge (due to supply challenges gauges may vary). 13/16" x 7/8" NOTE: Each stamping is made in-house, one-at-a-time, using vintage tools and processes. The detail in each stamping may vary, and a stamping with less detail is not considered defective.
Copper Stamping "Feathered Jesus Charm" (3 for $10!)
CS157
$10.00 $15.00
Approx. 16 gauge (due to supply challenges gauges may vary). 1-1/8" x 1/2" NOTE: Each stamping is made in-house, one-at-a-time, using vintage tools and processes. The detail in each stamping may vary, and a stamping with less detail is not considered defective.
Pattern Plate RMP266 Las Calaveras
RMP266
$39.00
Overall Design Size: approximately 2" x 6-7/8". Designed for use in a rolling mill.
Pattern Plate RMP268 Electric Slide
RMP268
$39.00
Overall Design Size: approximately 2" x 6-7/8". Designed for use in a rolling mill.
Pattern Plate RMP269 Garden Reflection
RMP269
$39.00
Overall Design Size: approximately 2" x 6-7/8". Designed for use in a rolling mill.
Pattern Plate RMP270 Spring Fairy Vignettes
RMP270
$39.00
Overall Design Size: approximately 2" x 6-7/8". Vignette Size: approximately 1-1/2" x 1-1/4" each (varies slightly) Designed for use in a rolling mill.
Pattern Plate RMP278 Wood Panels
RMP278
$39.00
Overall Design Size: approximately 2" x 6-7/8". Designed for use in a rolling mill.
New
Filter by
Filter by price