Design: 1-1/4" x 1-1/16" Guitar Pick Shape Die Set Includes: Die Top, with precision-welded cutter Die Bottom, with precision-registered center hole and metal guide marks on bottom- and right-side edges to assist in lining up metal in the die Urethane: Specific to each die set; not interchangeable with other designs. Color may vary. The components of each Die set are not interchangeable with other die sets, but all can be used with a single, standard Die Shoe. MUST BE USED WITH THE FSS DIE SHOE (available separately) Watch Kevin demonstrate how to use this die: https://youtu.be/7Gl-ShVKtlk
Design: 1.82" x 1.12” Matches PD 1466A Die Set Includes: Die Top, with precision-welded cutter Die Bottom, with precision-registered center hole and metal guide marks on bottom- and right-side edges to assist in lining up metal in the die Urethane: Specific to each die set; not interchangeable with other designs. Color may vary. The components of each Die set are not interchangeable with other die sets, but all can be used with a single, standard Die Shoe. MUST BE USED WITH THE FSS DIE SHOE (available separately) Watch Kevin demonstrate how to use this die: https://youtu.be/7Gl-ShVKtlk
Design: 1.5 x 0.9” Matches PD 1466 Die Set Includes: Die Top, with precision-welded cutter Die Bottom, with precision-registered center hole and metal guide marks on bottom- and right-side edges to assist in lining up metal in the die Urethane: Specific to each die set; not interchangeable with other designs. Color may vary. The components of each Die set are not interchangeable with other die sets, but all can be used with a single, standard Die Shoe. MUST BE USED WITH THE FSS DIE SHOE (available separately) Watch Kevin demonstrate how to use this die: https://youtu.be/7Gl-ShVKtlk
Design: 1-1/8" x 1/2" Die Set Includes: Die Top, with precision-welded cutter Die Bottom, with precision-registered center hole and metal guide marks on bottom- and right-side edges to assist in lining up metal in the die Urethane: Specific to each die set; not interchangeable with other designs. Color may vary. The components of each Die set are not interchangeable with other die sets, but all can be used with a single, standard Die Shoe. MUST BE USED WITH THE FSS DIE SHOE (available separately) Watch Kevin demonstrate how to use this die: https://youtu.be/7Gl-ShVKtlk
This FSS die perfectly matches Pancake Die 1219A. Design: 1" x 7/8" (25.4mm x 22.225mm) Die Set Includes: Die Top, with precision-welded cutter Die Bottom, with precision-registered center hole and metal guide marks on bottom- and right-side edges to assist in lining up metal in the die Urethane: Specific to each die set; not interchangeable with other designs. Color may vary. The components of each Die set are not interchangeable with other die sets, but all can be used with a single, standard Die Shoe.
Design: 1-1/4" x 7/8"(31mm x 23mm) Die Set Includes: Die Top, with precision-welded cutter Die Bottom, with precision-registered center hole and metal guide marks on bottom- and right-side edges to assist in lining up metal in the die Urethane: Specific to each die set; not interchangeable with other designs. Color may vary. The components of each Die set are not interchangeable with other die sets, but all can be used with a single, standard Die Shoe.
This die must be used in a hydraulic press. Design: 1-11/16" x 1-1/2". Overall die measures 3-3/8" x 6-3/16". This die is coordinated to work with RMP 322.
Please read the FULL DESCRIPTION below before purchasing. Named after one of the mountain ranges that surround Potter USA, the Rincon Press is our newest, most compact, and most economical jewelry hydraulic press. This press will work with pancake dies, impression dies, silhouette dies, and even our bracelet-forming frame.
Design: 7/8" x 9/16" (22 x 14mm). (Same size/shape as PD1491 that's included in the Riveted Shield Earrings Kit.) Die Set Includes: Die Top, with precision-welded cutter Die Bottom, with precision-registered center hole and metal guide marks on bottom- and right-side edges to assist in lining up metal in the die Urethane: Specific to each die set; not interchangeable with other designs. Color may vary. The components of each Die set are not interchangeable with other die sets, but all can be used with a single, standard or high-production Die Shoe. MUST BE USED WITH THE FSS DIE SHOE (available separately) Watch Kevin demonstrate how to use this die: https://youtu.be/7Gl-ShVKtlk
Design: 1-1/4" x 7/8" Die Set Includes: Die Top, with precision-welded cutter Die Bottom, with precision-registered center hole and metal guide marks on bottom- and right-side edges to assist in lining up metal in the die Urethane: Specific to each die set; not interchangeable with other designs. Color may vary. The components of each Die set are not interchangeable with other die sets, but all can be used with a single, standard Die Shoe.
Each cuff is approximately 6.5" long. The bracelet is made from 16-gauge copper that has been coated with a heavy-duty industrial silver plating (with a nickel base layer), similar to the heavy silver-plate of silverware. CANNOT be soldered, filed, or sanded (plating will be removed). CAN be lightly polished, slightly re-formed with non-marring forming tools, and patinated. Bracelets are all made from the same pattern but because they are rolled by hand they may have some inconsistencies and not be exactly identical. The inside surface and edges of the cuff may have small dings, scratches, and other imperfections; these are not considered defects. NOTE: This batch is NOT stamped "Silver Plated." Width: 1/2"
This mount is meant to be used with our wire-forming tools. Each wire-forming tool includes two mounting holes that fit securely onto the pegs in this mount. The mount has two holes where it can be secured to a work surface with screws. Once attached to a work surface, each wire-forming tool can be dropped down onto the mount and held securely in place with the pegs. Changing out tools is as easy as lifting the wire former off the pegs and replacing it with a different wire former. The mount measures 5" x 2". Wire forming tools SOLD SEPARATELY.
This organic texture is sure to catch your customers' eye! This listing is for one pattern plate; see the second photo for explanation of the three items in the photo. 2" x 6-3/4" x ~1/8"
Brand new! Use this tool to make shallow domed forms, such as trinket dishes, lockets, small containers, etc. 3" diameter. Coordinated to work with Pancake Die 1538 Sakura Blossom 1/4" thick. Die outer measurements: 4-7/8" x 4-3/4" Must be used with a large sheet of urethane (available separately). ***Will not fit in the discontinued Potter USA medium press***
Design: 3-1/2"from center to center of each edge Die itself: 7-3/4" x 5-1/2 Coordinated to work with BOTH the 3" Sakura Blossom Silhouette Die. SKU: SD-DF-020, and the 3" Abstracted Sakura Blossom SKU: SD-DF-019. ***Will not fit in the discontinued Potter USA medium press*** ***Will not fit in the discontinued Potter USA medium press***
This ultra-fine pattern was made by Kevin on an antique straight-line guilloche machine. The texture is SHALLOW and an exact replica of the guilloche pattern created by the machine. It's a perfect background texture, and is beautiful with transparent enamel. Design Size: 1-9/16" x ~6"; ~1/8" thick
Design Size: 1-3/8" x 6-5/8" **Please note, the spine design is not straight on the plate, but the plate still functions perfectly fine.** Designed for use in a rolling mill.