2" x 6-7/8"

Matches one of the designs on the pattern plate from the December 2023 Subscription Box! (plate not available separately) 18 x 40mm.

Matches one of the designs on the pattern plate from the December 2023 Subscription Box! (plate not available separately) 10 x 33.5mm.

Matches one of the designs on the pattern plate from the December 2023 Subscription Box! (plate not available separately) 10 x 31mm.

Design: 9/32" x 1-1/32" (7mm x 26mm) Die Set Includes: Die Top, with precision-welded cutter Die Bottom, with precision-registered center hole and metal guide marks on bottom- and right-side edges to assist in lining up metal in the die Urethane: Specific to each die set; not interchangeable with other designs. Color may vary. The components of each Die set are not interchangeable with other die sets, but all can be used with a single, standard Die Shoe.

Design: 13/32" x 1-9/32" (10mm x 32mm) Die Set Includes: Die Top, with precision-welded cutter Die Bottom, with precision-registered center hole and metal guide marks on bottom- and right-side edges to assist in lining up metal in the die Urethane: Specific to each die set; not interchangeable with other designs. Color may vary. The components of each Die set are not interchangeable with other die sets, but all can be used with a single, standard Die Shoe.

Design: 13/32" x 1-9/32" (10mm x 32mm) Die Set Includes: Die Top, with precision-welded cutter Die Bottom, with precision-registered center hole and metal guide marks on bottom- and right-side edges to assist in lining up metal in the die Urethane: Specific to each die set; not interchangeable with other designs. Color may vary. The components of each Die set are not interchangeable with other die sets, but all can be used with a single, standard Die Shoe.

Design: 9/32" x 1-1/32" (7mm x 26mm) Die Set Includes: Die Top, with precision-welded cutter Die Bottom, with precision-registered center hole and metal guide marks on bottom- and right-side edges to assist in lining up metal in the die Urethane: Specific to each die set; not interchangeable with other designs. Color may vary. The components of each Die set are not interchangeable with other die sets, but all can be used with a single, standard Die Shoe.

2" x 6-7/8"

High five! Design: 3/4" tall x 3/4" wide Die Itself: 5-1/4" x 3-3/4"

High five! Design: 1" tall x 1" wide Die Itself: 5-1/2" x 4-1/4"

This die must be used in a hydraulic press. Design: 1-3/4" x 13/16". Overall die measures 5-3/8" x 3-3/4".

This die must be used in a hydraulic press. Design: 2-3/16" x 1". Overall die measures 5-1/2" x 2-3/16".

This die must be used in a hydraulic press. Design: 1-7/8" x 1-1/4". Overall die measures 5-3/4" x 3-7/8".

This die must be used in a hydraulic press. Design: 1-1/2" x 1". Overall die measures 5-1/2" x 3-1/2".

This die must be used in a hydraulic press. Design: 1-1/4" x 13/16". Overall die measures 5-3/8" x 3-3/8".

This die must be used in a hydraulic press. Design: 1" x 11/16". Overall die measures 5-3/16" x 3-3/8".

This die must be used in a hydraulic press. Design: 1-1/8" x 1". Overall die measures 5-5/8" x 3-3/8".

This die must be used in a hydraulic press. This design matches RMP275 Ouija. Design: 1-1/4" x 1-1/32". Overall die measures 5-9/16" x 3-3/8".

This die must be used in a hydraulic press. This design matches RMP275 Ouija. Design: 15/16" x 13/16". Overall die measures 5-5/16" x 3-3/8".

This die must be used in a hydraulic press. This design matches RMP275 Ouija. Design: 1-1/4" x 15/16". Overall die measures 5-5/16" x 3-3/8".

This die must be used in a hydraulic press. This design matches RMP275. Design: 11/16" x 15/16". Overall die measures 5-5/16" x 3-3/8".

This die must be used in a hydraulic press. Design: 1-9/16" x 13/16". Overall die measures 6-1/16" x 3-3/8".

This die must be used in a hydraulic press. Design: 1-3/8" x 3/4". Overall die measures 5-5/16" x 3-5/16".

This die must be used in a hydraulic press. Design: 1-1/2" x 1/2". Overall die measures 5" x 3-5/16".

The Quick-Form Press in Red, invented in 2022 by Kevin Potter, combines the power of a kick-press with the ease of use of a hand-operated arbor press. The key to how this press operates is the cam. Unlike an arbor press, which has a linear force that limits the amount of pressure possible, the Quick-Form Press utilizes a cam that allows you to exert maximum force with minimal effort! Whether you're bending rings, cuff bracelets, napkin holders, or silverware, this all-in-one press provides a wide range of tooling for forming metal without the use of a hydraulic press. See the full description for all the details! The price Includes Free Domestic Shipping to the Continental US. Alaska, Hawaii, and international orders will require additional shipping charges. Please call for a shipping quote if you reside outside the continental US.

2" x 6-7/8"

Design: 1-1/2" x 1-1/4" Die Set Includes: Die Top, with precision-welded cutter Die Bottom, with precision-registered center hole and metal guide marks on bottom- and right-side edges to assist in lining up metal in the die Urethane: Specific to each die set; not interchangeable with other designs. Color may vary. The components of each Die set are not interchangeable with other die sets, but all can be used with a single, standard Die Shoe.

Design: 1-1/4" x 7/8" Die Set Includes: Die Top, with precision-welded cutter Die Bottom, with precision-registered center hole and metal guide marks on bottom- and right-side edges to assist in lining up metal in the die Urethane: Specific to each die set; not interchangeable with other designs. Color may vary. The components of each Die set are not interchangeable with other die sets, but all can be used with a single, standard Die Shoe.

Layer on top of a 2" circle to make a peace sign! (PD600) Design: 2" x 1-5/8". Die: 6-1/2" x 3-1/2" Last photo: Sample of Small is on the right.

Layer on top of a 1-1/2" circle to make a peace sign! (PD602) Design: 1-1/2" x 1-13/16". Die: 6" x 3-3/8" Last photo: Sample of Small is on the right.

Layer on top of a 1" circle to make a peace sign! (PD642) Design: 1" x 3/4". Die: 5-1/2" x 3-3/8" Last photo: Sample of Small is on the right.

Pressed in 20 gauge sterling silver. Design: 1-3/8" x 2-1/4" NOTE: Each stamping is made in house, one at a time, using vintage tools and processes. The detail in each stamping may vary, and a stamping with less detail is not considered defective.

This option is for LAYAWAY Payment for the Quick Form Press. The Quick-Form Press , invented in 2022 by Kevin Potter, combines the power of a kick-press with the ease of use of a hand-operated arbor press. The key to how this press operates is the cam. Unlike an arbor press, which has a linear force that limits the amount of pressure possible, the Quick-Form Press utilizes a cam that allows you to exert maximum force with minimal effort! Whether you're bending rings, cuff bracelets, napkin holders, or silverware, this all-in-one press provides a wide range of tooling for forming metal without the use of a hydraulic press. See the full description for all the details! The price Includes Free Domestic Shipping to the Continental US. Alaska, Hawaii, and international orders will require additional shipping charges. Please call for a shipping quote if you reside outside the continental US.

This option is for LAYAWAY Payment for the NEW Rincon Press. Manual: $995 Electric: $3,045 This is our newest, most compact, and most economical 20-ton jewelry hydraulic press. This press will work with pancake dies, impression dies, silhouette dies, and even our bracelet-forming frame.

This FSS die perfectly matches Pancake Die 1219A. Design: 1" x 7/8" (25.4mm x 22.225mm) Die Set Includes: Die Top, with precision-welded cutter Die Bottom, with precision-registered center hole and metal guide marks on bottom- and right-side edges to assist in lining up metal in the die Urethane: Specific to each die set; not interchangeable with other designs. Color may vary. The components of each Die set are not interchangeable with other die sets, but all can be used with a single, standard Die Shoe.