This vignette depicts a daisy with its own stem wrapping around the frame. It has a larger version available. From Villemin in Paris, France. Design: 13/16" diameter

This vignette depicts a daisy with its own stem wrapping around the frame. It has a smaller version available. From Villemin in Paris, France. Design: 1-1/16" diameter

Approx. 14 gauge (due to supply challenges gauges may vary) Design: 2-3/4 x 1/2 NOTE: Each stamping is made in-house, one-at-a-time, using vintage tools and processes. The detail in each stamping may vary, and a stamping with less detail is not considered defective.

Approx. 16 gauge (due to supply challenges gauges may vary) Design: 1-1/4" x 15/16" or 31.75mm x 23.81mm NOTE: Each stamping is made in-house, one-at-a-time, using vintage tools and processes. The detail in each stamping may vary, and a stamping with less detail is not considered defective.

Approx. 16 gauge (Due to supply challenges, gauge may vary.) Design: 1/2 x 1 NOTE: Each stamping is made in house, one at a time, using vintage tools and processes. The detail in each stamping may vary, and a stamping with less detail is not considered defective.

Approx. 16 gauge (Due to supply challenges, gauge may vary.) Design: 1/2 x 1 NOTE: Each stamping is made in house, one at a time, using vintage tools and processes. The detail in each stamping may vary, and a stamping with less detail is not considered defective.

Approx. 16 gauge (Due to supply challenges, gauge may vary.) Design: 5/8 x 7/8 NOTE: Each stamping is made in house, one at a time, using vintage tools and processes. The detail in each stamping may vary, and a stamping with less detail is not considered defective.

Approx. 16 gauge (Due to supply challenges, gauge may vary.) Design: 1-7/8 x 1 NOTE: Each stamping is made in house, one at a time, using vintage tools and processes. The detail in each stamping may vary, and a stamping with less detail is not considered defective.

Approx. 16 gauge (Due to supply challenges, gauge may vary.) Design: 1" diameter NOTE: Each stamping is made in house, one at a time, using vintage tools and processes. The detail in each stamping may vary, and a stamping with less detail is not considered defective.

Approx. 16 gauge (Due to supply challenges, gauge may vary.) Design: 1/2 diameter NOTE: Each stamping is made in house, one at a time, using vintage tools and processes. The detail in each stamping may vary, and a stamping with less detail is not considered defective.

Overall size: 2" x 6-7/8".

Overall size: 2" x 6-7/8".

Overall size: 2" x 6-7/8".

Overall size: 2" x 6-7/8".

Overall size: 2" x 6-7/8".

Approx. 16 gauge (Due to supply challenges, gauge may vary.) Design: 7/8 x 1-1/4 NOTE: Each stamping is made in house, one at a time, using vintage tools and processes. The detail in each stamping may vary, and a stamping with less detail is not considered defective.

Overall size: 2" x 6-7/8".

Overall size: 2" x 6-7/8".

Two delrin conforming formers in 90° and 60° angles, and a corresponding steel angle forming mandrel. Use ONLY with the Quick-Form Press, Former Adapter, and Flat Bracelet Formers. The conformers must mount on the Former Adapter (sold separately).

This shot plate includes four star-adjacent shapes from varying collections. Use them in any kind of metal creation. Top Left: 9/16" diameter with 1mm - 3mm settings Top Right: 1/2" diameter Bottom Left: 1/2" diameter with a 1.5mm x 3.5mm Bottom Right: 1/2" diameter with 4mm center

Design: 2-3/8" x 13/16". Die: 5" x 4-3/8".

Brand new! Use this tool to make shallow domed forms, such as trinket dishes, lockets, small containers, etc. 3" wide x 1-7/8"" tall, 1/4" thick. Must be used with a large sheet of urethane (available separately). ***Will not fit in the discontinued Potter USA medium press***

This Victorian design can be used as part of an earring, bracelet, or pendant. From the Rumart collection. Design: 1-1/16" x 7/16"

This design depicts a engraved snowdrops or other bell flowers. It can be used as a bail, part of an earring, or bracelet piece. From the Rumart collection. Design: 1-1/32" x 9/32"

Brand new! Use this tool to make shallow domed forms, such as trinket dishes, lockets, small containers, etc. 3" wide x 2-1/8"" tall, 1/4" thick. Must be used with a large sheet of urethane (available separately). ***Will not fit in the discontinued Potter USA medium press***

This leaf has thin, shallow texture that makes it shine. From Gold Machinery. Design: 15/16" x 7/16"

This leaf can make a pendant, earrings, and more. From the Parisi Tool & Die Co. Design: 9/16" x 11/16"

This nouveau design can be sawed in half to make earrings or used whole as a pendant. From the Parisi Tool & Die Co. Design: 1-1/8" x 7/8"

This shot plate includes three designs from Breuning. They can make ring tops, pendants, earrings, and more! Left: 13/16" x 5/16" with a 4mm setting Middle: 5/8" x 1/4" with a 4mm setting Right: x 25/32" x 11/32" with a 3.5mm setting

This art nouveau design can be a pendant, earring, or link for a bracelet. From the Rumart collection. Design: 11/16" x 11/16"

Use this die with our hollow bead tutorial, available on our YouTube channel. From Larter & Sons. Design: 3/4" x 1/2" and 7mm deep

Overall size: 2-13/16" x 5/8" Created by Dennis Main on the straight line engraving machine at Potter USA.

Overall size: 2-13/16" x3/4". Created by Dennis Main on the straight line engraving machine at Potter USA.

Overall size: 2" x 6-7/8". This plate was sold as part of Bri's Pattern Bundle SKU: PTRNBNDLE

Overall size: 2" x 6-7/8". This plate was sold as part of Bri's Pattern Bundle SKU: PTRNBNDLE

Overall size: 2" x 6-7/8".