Plate: 2" x 7" x ~1/8" thick

This pattern plate takes its inspiration from traditional henna and mehndi designs. It is designed to match with Pancake Die R1184-Wide Cigar Band. Use the pancake die to cut out the cigar band shapes (there are two different patterns on this plate) and then use the remaining scrap for other projects. We specifically designed the plate so that the area around the ring bands has a different pattern and can be used as well so you don't waste any metal! Design Size: 2" x ~6-3/4" Designed for use in a rolling mill. Sample ring by Lynette Andreasen

Overall Design Size: approximately 2" x 6-7/8". Designed for use in a rolling mill.

Design Size: approximately 2" x 6-7/8" Designed for use in a rolling mill.

This plate is designed to be used in a rolling mill with annealed, non-ferrous metal. Plate Size: ~7" L x 2" W Plate Thickness: ~2.5mm Design Size: 6-1/2" L x 1-1/2" W

7"L x 2"W or 177.8mm x 50.8mm

Design Size: approximately 2" x 6-7/8" Designed for use in a rolling mill.

2"H x 7"W

Design: 1-3/16" x 6-5/8" Plate: 2" x ~7" ~2.5mm thick

1-1/32" x 6-1/2" (26.3 x 165mm) Designed for use in a rolling mill.

Overall Design Size: approximately 2" x 7" Designed for use in a rolling mill.

Overall Design Size: approximately 2" x 7" Designed for use in a rolling mill.

This listing is for one pattern plate; see the second photo for explanation of the three items in the photo. Design: 1-11/16" x 6-3/4" x ~1/8"

Overall size: 2" x 6-7/8".

Overall size: 2" x 6-7/8". Pattern size is approximately 1-1/8" x 6-3/4".

Overall size: 2" x 6-7/8".

Overall size: 2" x 6-7/8".

Overall size: 2" x 6-7/8".

This plate is designed to be used in a rolling mill with annealed, non-ferrous metal. Plate Size: ~7" L x 2" W Plate Thickness: ~2.5mm Leaf 1: 1-1/2" x 3-1/2" Leaf 2: 1-1/2" x 3" Leaf 3: 1-1/2" x 3-1/2"

Overall size: 2" x 6-7/8". Each design element is approx. 1" tall

Overall Design Size: approximately 2" x 6-7/8". Designed for use in a rolling mill.

Overall size: 2" x 6-7/8".

2" x 6-7/8"

Overall Design Size: approximately 2" x 6-7/8". The designs on this plate are very small. Each sun measures approximately 5mm. Designed for use in a rolling mill.

Overall size: 2" x 6-7/8". Designs from left to right measure: 7/8" x 1/2", 7/8" x 5/8", Center design measures 13/16" diameter, 5/8" x 1/2", 3/4" x 13/16", 3/4" x 5/8"

Design Size: approximately 2" x 6-7/8". Designed for use in a rolling mill. Sample earrings made by Erin Greenberg (shibori plate and the large guitar pick pancake and silhouette die bundle) https://potterusa.com/pancake-silhouette-die-bundle-large-guitar-pick

Design Size: approximately 2" x 6-7/8". Mandala Size: 1-1/4" diameter Designed for use in a rolling mill.

Design Size: approximately 2" x 6-7/8". Designed for use in a rolling mill. Sample by Lynette Andreasen.

Designed for use in a rolling mill; will also work in a 20-ton press 2" x ~8" Plate Thickness: ~2.5mm

Perfect for earrings! Left: 2-1/8" x 1/2" each Middle: 1-7/8" x 9/16" each Right: 1-9/16" x 3/8" each Plate Thickness: ~2.5mm Customer demo: Kelly Wakefield- Lopez

Overall Design Size: approximately 2" x 7" Left to Right Leaf Sizes - 15/16" x 1-3/8", 1-3/4" x 15/16", 1-3/8" x 3/4", 1-1/2" x 1-11/16" Designed for use in a rolling mill.

Overall size: 2" x 6-7/8". From Left to right: 1-7/16" x 13/16", 1-5/8"x5/8", 1-5/8" x 3/8", 1-1/2" x 13/16", 1-1/2" x 11/16", 1-9/16" x 13/16"

Design Size: approximately 2" x 6-7/8". Designed for use in a rolling mill.

Design: Design Size: 2" x 6-3/4"; ~1/8" thick

Design Size: 2" x ~6-3/16". Each strip of pattern is approximately 3/8" wide. This pattern plate pairs well with Pancake Die Bracelet B044A 3/8" Thin Bracelet, and Pancake Die Bracelet B044 1/2" Thin Bracelet. .

This pattern plate features three different mermaids, each perfect for a large pendant, plaque, or box top! 1-3/4" diameter each