Overall Design Size: approximately 2" x 6-7/8". Designed for use in a rolling mill.

Overall Design Size: approximately 2" x 6-7/8". Designed for use in a rolling mill.

Overall Design Size: approximately 2" x 6-7/8". Designed for use in a rolling mill.

Design Size: approximately 2-15/16" x 1/4" Designed for use in a rolling mill.

Design Size: approximately 2-15/16" x 1/4" Designed for use in a rolling mill.

Design Size: approximately 2-15/16" x 5/16" Designed for use in a rolling mill.

Design Size: approximately 2-15/16" x 3/8" Designed for use in a rolling mill.

Each cuff is approximately 6.5" long. The bracelet is made from 16-gauge copper that has been coated with a heavy-duty industrial silver plating (with a nickel base layer), similar to the heavy silver-plate of silverware. CANNOT be soldered, filed, or sanded (plating will be removed). CAN be lightly polished, slightly re-formed with non-marring forming tools, and patinated. Bracelets are all made from the same pattern but because they are rolled by hand they may have some inconsistencies and not be exactly identical. The inside surface and edges of the cuff may have small dings, scratches, and other imperfections; these are not considered defects. NOTE: This batch is NOT stamped "Silver Plated." Width: 1/2"

Overall Design Size: approximately 2" x 6-7/8". Designed for use in a rolling mill.

Each cuff is approximately 6.5" long. The bracelet is made from 16-gauge copper that has been coated with a heavy-duty industrial silver plating (with a nickel base layer), similar to the heavy silver-plate of silverware. CANNOT be soldered, filed, or sanded (plating will be removed). CAN be lightly polished, slightly re-formed with non-marring forming tools, and patinated. Bracelets are all made from the same pattern but because they are rolled by hand they may have some inconsistencies and not be exactly identical. The inside surface and edges of the cuff may have small dings, scratches, and other imperfections; these are not considered defects. NOTE: This batch is NOT stamped "Silver Plated." Width: 1/2"

Overall Design Size: approximately 2" x 6-7/8". Designed for use in a rolling mill.

Overall Design Size: approximately 2" x 6-7/8". Designed for use in a rolling mill.

Brand new! Use this tool to make shallow domed forms, such as trinket dishes, lockets, small containers, etc. 3" wide x 1.5" tall, 1/4" thick. Must be used with a large sheet of urethane (available separately). ***Will not fit in the discontinued Potter USA medium press***

Brand new! Use this tool to make shallow domed forms, such as trinket dishes, lockets, small containers, etc. 3" wide x 2-5/16" tall, 1/4" thick. Sample by Lynette Andreasen. Must be used with a large sheet of urethane (available separately). ***Will not fit in the discontinued Potter USA medium press***

Brand new! Use this tool to make shallow domed forms, such as trinket dishes, lockets, small containers, etc. 3" wide x 2-1/4" tall, 1/4" thick. Must be used with a large sheet of urethane (available separately). ***Will not fit in the discontinued Potter USA medium press***

Approx. 20 gauge (due to supply challenges gauges may vary) Design: 7/8" x 13/16" with 3mm setting NOTE: Each stamping is made in-house, one-at-a-time, using vintage tools and processes. The detail in each stamping may vary, and a stamping with less detail is not considered defective.

Approx. 20 gauge (due to supply challenges gauges may vary) Design: 1-1/2" x 1-1/4" NOTE: Each stamping is made in-house, one-at-a-time, using vintage tools and processes. The detail in each stamping may vary, and a stamping with less detail is not considered defective.

Overall Design Size: approximately 2" x 6-7/8". Each Bee is 2cm wide x 15mm tall. Designed for use in a rolling mill.

Design Size: approximately 3" x 1/4" Designed for use in a rolling mill.

Design Size: approximately 3" x 1/4" Designed for use in a rolling mill.

Approx. 20 gauge (due to supply challenges gauges may vary) Design: 1-1/16" x 9/16" NOTE: Each stamping is made in-house, one-at-a-time, using vintage tools and processes. The detail in each stamping may vary, and a stamping with less detail is not considered defective.

Approx. 20 gauge (due to supply challenges gauges may vary) Design: 1/2" x 1/2" NOTE: Each stamping is made in-house, one-at-a-time, using vintage tools and processes. The detail in each stamping may vary, and a stamping with less detail is not considered defective.

Approx. 20 gauge (due to supply challenges gauges may vary) Design: 15/16" x 3/4" NOTE: Each stamping is made in-house, one-at-a-time, using vintage tools and processes. The detail in each stamping may vary, and a stamping with less detail is not considered defective.

Overall Design Size: approximately 2" x 6-7/8". Each constellation measures about 5/8" at the widest point and would coordinate well with Pancake Die 642A 3/4" Circle. Designed for use in a rolling mill. ***The zodiac names are included on the plate to be a reference point only and not intended to be part of the final design.***

Birthflower designs for months January, February, March, April, May and June. Overall Design Size: approximately 2" x 6-7/8". Works well with Silhouette Die 124 Large Oval (SKU: SD 124), Pancake Die 523 Medium Oval (SKU: PD 523), or Pancake Die 1373 Oval Pendant (SKU: PD 1373) Designed for use in a rolling mill.

Birthflower designs for months July, August, Septemberee, October, November, December. Overall Design Size: approximately 2" x 6-7/8". Works well with Silhouette Die 124 Large Oval (SKU: SD 124), Pancake Die 523 Medium Oval (SKU: PD 523), or Pancake Die 1373 Oval Pendant (SKU: PD 1373) Designed for use in a rolling mill.

Approx. 20 gauge (due to supply challenges gauges may vary) Design: 20mm x 13mm NOTE: Each stamping is made in-house, one-at-a-time, using vintage tools and processes. The detail in each stamping may vary, and a stamping with less detail is not considered defective.

Overall Design Size: approximately 2" x 6-7/8". Designed for use in a rolling mill.

Overall Design Size: approximately 2" x 6-7/8". Designed for use in a rolling mill.

Overall Design Size: approximately 2" x 6-7/8". Designed for use in a rolling mill.

Overall Design Size: approximately 2" x 6-7/8". Designed for use in a rolling mill.

Overall Design Size: approximately 2" x 6-7/8". Designed for use in a rolling mill.

Overall Design Size: approximately 2" x 6-7/8". Designed for use in a rolling mill.

Overall Design Size: approximately 2" x 6-7/8". Designed for use in a rolling mill.

Approx. 16 gauge (due to supply challenges gauges may vary). 1" x 5/8" NOTE: Each stamping is made in-house, one-at-a-time, using vintage tools and processes. The detail in each stamping may vary, and a stamping with less detail is not considered defective.

Approx. 16 gauge (due to supply challenges gauges may vary). 1" x 5/8" NOTE: Each stamping is made in-house, one-at-a-time, using vintage tools and processes. The detail in each stamping may vary, and a stamping with less detail is not considered defective.