5-1/2" x 1-1/2" at widest point. Band width 1" tapering to 1-1/2". Die itself 5-13/16" x 7-1/2". Please read note below.

This pattern plate was designed to coordinate with some of our bug body impression dies and works well with shotplate die SKU: Bug1 The plate measures approximately 2" x 7", see the photos for measurements of individual wings. Designed for use in a rolling mill.

The design is 1-7/8" x 2"

1-15/16" x 27/32"

Design Size: 2" x ~6-3/16". Each strip of pattern is approximately 3/8" wide. This pattern plate pairs well with Pancake Die Bracelet B044A 3/8" Thin Bracelet, and Pancake Die Bracelet B044 1/2" Thin Bracelet. .

Design Size: 2" x ~6-3/16". Each strip of pattern is approximately 3/8" wide. Sample jewelry made by Jolé Danae Moon. This pattern can be used to make individual jewelry pieces like earrings and cuff links, as well as embellishments for other pieces.

Design Size: 2" x ~6-11/16" Designed for use in a rolling mill.

Design Size: 2" x 6-3/4" Designed for use in a rolling mill. Sample earrings by Lynette Andreasen

Design Size: 1-3/8" x 6-5/8" **Please note, the spine design is not straight on the plate, but the plate still functions perfectly fine.** Designed for use in a rolling mill.

Design Size: approximately 2" x 7" Designed for use in a rolling mill.

Design Size: approximately 2" x 7" Designed for use in a rolling mill.

Design Size: approximately 2" x 6-7/8" Designed for use in a rolling mill.

Design: 2-5/8" x 3-1/2" Die itself: 7-1/8" x 5-1/2" Coordinated to work with the Rounded Rectangle Dish Former die DF-014 ***Will not fit in the discontinued Potter USA medium press*** ***Will not fit in Rincon Press

Brand new! Use this tool to make shallow domed forms, such as trinket dishes, lockets, small containers, etc. 2-13/16" x 1-15/16" 1/4" thick. Must be used with a large sheet of urethane (available separately).

Design Size: approximately 2" x 6-7/8" Designed for use in a rolling mill. Sample earrings by Lynette Andreasen

Design Size: approximately 2" x 6-7/8" Designed for use in a rolling mill.

Design Size: approximately 1-3/4" x 6-7/8" Designed for use in a rolling mill.

Design Size: approximately 2" x 6-7/8" Designed for use in a rolling mill.

Design Size: approximately 2" x 6-7/8" Designed for use in a rolling mill.

Brand new! Use this tool to make shallow domed forms, such as trinket dishes, lockets, small containers, etc. 3" diameter. Coordinated to work with Pancake Die 1538 Sakura Blossom 1/4" thick. Die outer measurements: 4-7/8" x 4-3/4" Must be used with a large sheet of urethane (available separately). ***Will not fit in the discontinued Potter USA medium press***

Brand new! Use this tool to make shallow domed forms, such as trinket dishes, lockets, small containers, etc. 3" diameter. Coordinated to work with the Pancake Die - Geometric 5-Pointed Shape SKU: PD 1536 1/4" thick. Outside measurements of die: 4-7/8" x 4-3/4" Must be used with a large sheet of urethane (available separately). ***Will not fit in the discontinued Potter USA medium press***

Design: 3-1/2"from center to center of each edge Die itself: 7-3/4" x 5-1/2 Coordinated to work with BOTH the 3" Sakura Blossom Silhouette Die. SKU: SD-DF-020, and the 3" Abstracted Sakura Blossom SKU: SD-DF-019. ***Will not fit in the discontinued Potter USA medium press*** ***Will not fit in the discontinued Potter USA medium press***

Design: 3-1/2"from center to center of each edge Die itself: 7-3/4" x 5-1/2 Coordinated to work with the 3" Sakura Blossom Silhouette Die. SKU: SD-DF-021 ***Will not fit in the discontinued Potter USA medium press***

Gnome is 3" tall x 1-1/2" wide. Die itself is 6-1/2" x 4-7/8". Will not fit in the discontinued medium press.

2-7/8" wide by 1-7/8" tall. Die itself is 6-1/4" x 5". Will not fit in the discontinued medium press.

3" tall x 1.5" wide. Die itself is 5-7/8" x 5". ***Will not fit in the discontinued Potter USA medium press***

Brand new! Use this tool to make shallow domed forms, such as trinket dishes, lockets, small containers, etc. 2-5/8" wide from center of each side. 3" wide from point to point. Overall die size 4-7/8" x 4-1/2". Coordinated to work with the Pancake Die - Hexagon SKU: PD 1539 1/4" thick. Must be used with a large sheet of urethane (available separately). ***Will not fit in the discontinued Potter USA medium press***

Brand new! Use this tool to make shallow domed forms, such as trinket dishes, lockets, small containers, etc. 2-1/2" wide x 3" tall. Overall die size 4-7/8" x 4-7/16". Coordinated to work with the Pancake Die -Hamsa SKU: PD 1548 1/4" thick. Must be used with a large sheet of urethane (available separately). ***Will not fit in the discontinued Potter USA medium press***

3" tall x 1-11/16" wide. Die itself is 6" x 5". ***Will not fit in the discontinued Potter USA medium press***

3" tall x 1-9/16" wide. Die itself is 5-15/16" x 5". ***Will not fit in the discontinued Potter USA medium press***

3" tall x 1-11/16" wide. Die itself is 6-1/16" x 5". ***Will not fit in the discontinued Potter USA medium press***

Design Size: approximately 2" x 6-7/8" Designed for use in a rolling mill.

Make your own shot glasses with this specialized tool kit! This toolkit includes: - 4-9/16" Cylindrical Roll Pancake Die - 1-1/4" Circle Pancake Die - Shot Glass Mandrel ***Some products in toolkits have previously been sold separately, but may not be excluded from the toolkit. Duplicates you recieve in with toolkits will not be refunded.