Design: 1-1/4" x 1". Die: 5-1/2" x 3-3/8".

Design: 3/4" x 5/8". Die: 5" x 3-3/8".

Design: 1-3/8" x 1-3/8". Die: 5-13/16" x 3-3/8".

Design: 11/16" x 9/16". Die: 5" x 3-3/8".

Design: 7/8" x 3". Die: 5-3/16" x 4-15/16".

Design: 3/4" x 3". Die: 5-1/8" x 4-15/16".

Design: 15/16" x 3". Die: 5-3/8" x 4-15/16".

Design: 1-1/8" x 3". Die: 5-1/2" x 4-15/16".

7/8" x 9/16" Die: 5" x 3-3/8".

1-3/16" x 3/4". Die: 5-1/2" x 3-3/8".

Total design: 1-3/4" x 2-1/8". Each drop: 1-3/4" x 1/2". Die: 6" x 4-1/8".

Overall Design Size: approximately 2" x 7" Designed for use in a rolling mill.

Overall Design Size: approximately 2" x 7" Designed for use in a rolling mill.

Overall Design Size: approximately 2" x 7" Left to Right Leaf Sizes - 15/16" x 1-3/8", 1-3/4" x 15/16", 1-3/8" x 3/4", 1-1/2" x 1-11/16" Designed for use in a rolling mill.

Approx. 16 gauge (due to supply challenges gauges may vary) Design: 1-5/8" diameter NOTE: Each stamping is made in-house, one-at-a-time, using vintage tools and processes. The detail in each stamping may vary, and a stamping with less detail is not considered defective.

Approx. 23x10mm. Matches EG-E833-AB. Cut metal with pancake die first, then press in EG-E833-AB. Can also be used by itself as a decorative element.

Approx. 8.5 x 8.5mm. Matches EG-E833-AB. Cut metal with pancake die first, then press in EG-E833-AB. Can also be used by itself as a decorative element.

Overall Design Size: approximately 2" x 7" Designed for use in a rolling mill.

Overall Design Size: approximately 2" x 7" Designed for use in a rolling mill.

Overall Design Size: approximately 2" x 7" Designed for use in a rolling mill.

This die should ONLY ONLY BE USED with the STANDARD DIE SHOE. If you use this die with the high production shoe, it will collapse and result in catastrophic failure of the tool. Design: 1-1/2" x 3/4" Die Set Includes: Die Top, with precision-welded cutter Die Bottom, with precision-registered center hole and metal guide marks on bottom- and right-side edges to assist in lining up metal in the die Urethane: Specific to each die set; not interchangeable with other designs. Color may vary. The components of each Die set are not interchangeable with other die sets, but all can be used with a single, standard Die Shoe. MUST BE USED WITH THE STANDARD FSS DIE SHOE (available separately) Watch Kevin demonstrate how to use this die: https://youtu.be/7Gl-ShVKtlk

Overall Design Size: approximately 2" x 7" Designed for use in a rolling mill.

Overall Design Size: approximately 2" x 7" Designed for use in a rolling mill.

This easy-to-use ear wire jig makes it easy to make repeatable, consistently sized shepherd’s hook-style ear wires. See long description for instructions, and watch the video below (coming soon)! This tool is NOT used in a hydraulic press. Finished ear wire is approx. 25mm long, 10.5mm wide, and features an outward bend in the end of the wire to help secure it in the ear when worn. The loop is approx. 3mm diameter. Recommended for use with 20g wire with a balled-up end.

Overall Design Size: approximately 2" x 7" Designed for use in a rolling mill.

Overall Design Size: approximately 2" x 7" Designed for use in a rolling mill.

Use to make humpback rings. Size: 3/4" T x 2-1/4" L x 1" W

Overall Design Size: approximately 2" x 6-7/8". Designed for use in a rolling mill.

Overall Design Size: approximately 2" x 6-7/8". Designed for use in a rolling mill.

Overall Design Size: approximately 2" x 6-7/8". Designed for use in a rolling mill.

Overall Design Size: approximately 2" x 7" Designed for use in a rolling mill.

Design: 1.82" x 1.12” Matches PD 1466A Die Set Includes: Die Top, with precision-welded cutter Die Bottom, with precision-registered center hole and metal guide marks on bottom- and right-side edges to assist in lining up metal in the die Urethane: Specific to each die set; not interchangeable with other designs. Color may vary. The components of each Die set are not interchangeable with other die sets, but all can be used with a single, standard Die Shoe. MUST BE USED WITH THE FSS DIE SHOE (available separately) Watch Kevin demonstrate how to use this die: https://youtu.be/7Gl-ShVKtlk

Design: 1.5 x 0.9” Matches PD 1466 Die Set Includes: Die Top, with precision-welded cutter Die Bottom, with precision-registered center hole and metal guide marks on bottom- and right-side edges to assist in lining up metal in the die Urethane: Specific to each die set; not interchangeable with other designs. Color may vary. The components of each Die set are not interchangeable with other die sets, but all can be used with a single, standard Die Shoe. MUST BE USED WITH THE FSS DIE SHOE (available separately) Watch Kevin demonstrate how to use this die: https://youtu.be/7Gl-ShVKtlk

Overall Design Size: approximately 2" x 6-7/8". Small leaves: 1/2" x 7/16" Big Leaves: 1" x 9/16" Designed for use in a rolling mill.

Approx. 16 gauge (due to supply challenges gauges may vary) Design: 2-7/32" x 7/16" NOTE: Each stamping is made in-house, one-at-a-time, using vintage tools and processes. The detail in each stamping may vary, and a stamping with less detail is not considered defective.

Overall Design Size: approximately 2" x 6-7/8". Designed for use in a rolling mill.