Design: 1-1/4" x 1-3/4". Die: 6-1/4" x 3-3/4".

Lg.: 25.5 x 31mm. Sm.: 17 x 18.5mm. Die: 5-1/8" x 4-3/8".

Shape: 1-1/2" x 1" Die: 5-1/2" x 3-1/2"

1-1/4" x 1"

7/8" x 7/8"

1/2" x 15/16"

1/4" x 3/4"

Design Size: approximately 2" x 6-7/8". Designed for use in a rolling mill. Sample by Lynette Andreasen.

Each cuff is approximately 6.5" long. The bracelet is made from 16-gauge copper that has been coated with a heavy-duty industrial silver plating (with a nickel base layer), similar to the heavy silver-plate of silverware. CANNOT be soldered, filed, or sanded (plating will be removed). CAN be lightly polished, slightly re-formed with non-marring forming tools, and patinated. Bracelets are all made from the same pattern but because they are rolled by hand they may have some inconsistencies and not be exactly identical. The inside surface and edges of the cuff may have small dings, scratches, and other imperfections; these are not considered defects. NOTE: This batch is NOT stamped "Silver Plated." Width: 1/2"

Design: 3/4" x 3/4" Die Set Includes: Die Top, with precision-welded cutter Die Bottom, with precision-registered center hole and metal guide marks on bottom- and right-side edges to assist in lining up metal in the die Urethane: Specific to each die set; not interchangeable with other designs. Color may vary. The components of each Die set are not interchangeable with other die sets, but all can be used with a single, standard Die Shoe. MUST BE USED WITH THE FSS DIE SHOE (available separately) Watch Kevin demonstrate how to use this die: https://youtu.be/7Gl-ShVKtlk

Design Size: approximately 2" x 6-7/8". Designed for use in a rolling mill.

Overall size: 2" x 6-7/8". From left to right, 1-1/16" x 5/8", 13/16" x 3/4", 1" x 3/4", 3/4" x 5/8"

3" tall x 1-11/16" wide. Die itself is 6-1/16" x 5". ***Will not fit in the discontinued Potter USA medium press***

Leaf: 2-1/2" x 1-15/16". Die dimensions: 6-7/8" x 3-13/16".

Design: 1-1/8" x 3". Die: 5-5/8" x 5-1/2".

Leaf: 2-1/2" x 1-3/4". Die dimensions: 6-7/8" x 3-13/16".

Overall Design Size: approximately 2" x 6-7/8". Designed for use in a rolling mill.

This asymmetrical rectangle features two opposing corners with a curved radius. Perfect for earrings or back plates for contemporary designs. Design: 11/16" x 1" Die Set Includes: Die Top, with precision-welded cutter Die Bottom, with precision-registered center hole and metal guide marks on bottom- and right-side edges to assist in lining up metal in the die Urethane: Specific to each die set; not interchangeable with other designs. Color may vary. The components of each Die set are not interchangeable with other die sets, but all can be used with a single, standard Die Shoe. MUST BE USED WITH THE FSS DIE SHOE (available separately) Watch Kevin demonstrate how to use this die: https://youtu.be/7Gl-ShVKtlk

Design: 1-1/2" x 1-1/4" Die Set Includes: Die Top, with precision-welded cutter Die Bottom, with precision-registered center hole and metal guide marks on bottom- and right-side edges to assist in lining up metal in the die Urethane: Specific to each die set; not interchangeable with other designs. Color may vary. The components of each Die set are not interchangeable with other die sets, but all can be used with a single, standard Die Shoe.

Facet-nating! Design: 1-1/2" tall x 3/4" wide Die Itself: 6-1/8" x 3-3/8"

Design: 1.5" x 15/16". Die itself: 5-13/16" x 3-1/4"

Design: 1-1/4" x 5/8". Die itself: 6" x 3-1/4"

Design: 1" x 5/8". Die itself: 5-1/2" x 3-1/4"

Design Size: approximately 2" x 6-7/8" Designed for use in a rolling mill.

Design Size: approximately 2" x 7" Designed for use in a rolling mill.

Overall Design Size: approximately 2" x 6-7/8". Designed for use in a rolling mill.

3" x 2-1/2". Die 7-3/16" x 5".

Overall Design Size: approximately 2" x 7" Designed for use in a rolling mill.

Design Size: approximately 2" x 6-7/8" Each house measures about 1-7/8" x 1-9/16". Coordinated to work with PD 1592 - Gingerbread House. Designed for use in a rolling mill.

Cat: 39 x 16.5mm. Die: 5-3/4" x 3-1/2"

1-15/16" x 27/32"

17/32" x 1-5/8" (13.6 x 42.1mm)

Overall Design Size: approximately 2" x 6-7/8". Designed for use in a rolling mill.

Design Size: approximately 3" x 1/4" Designed for use in a rolling mill.

Overall Design Size: approximately 2" x 6-7/8". Central Ouija board 1-1/4" x 7/8". Larger "Goodbye" Planchette 1-1/4" x 1". Smaller "Goodbye" planchette 7/8" x 3/4". Larger moon planchette 1-1/4" x 15/16". Smaller moon planchette 15/16" x 11/16". Designed for use in a rolling mill.

Overall Design Size: approximately 2" x 7" Designed for use in a rolling mill.