Overall size: 2-13/16" x3/4". Created by Dennis Main on the straight line engraving machine at Potter USA.

Overall size: 2" x 6-7/8". This plate was sold as part of Bri's Pattern Bundle SKU: PTRNBNDLE

Overall size: 2" x 6-7/8". This plate was sold as part of Bri's Pattern Bundle SKU: PTRNBNDLE

Overall size: 2" x 6-7/8".

Approx. 16 gauge (Due to supply challenges, gauge may vary.) Design: 6-1/2 x 1-1/16 NOTE: Each stamping is made in house, one at a time, using vintage tools and processes. The detail in each stamping may vary, and a stamping with less detail is not considered defective.

An adapter to be used with the Flat Bracelet Conformers. Use ONLY with the Quick-Form Press, and Flat Bracelet Formers.

Two delrin conforming formers in 2" and 1.5" diameter. Use ONLY with the Quick-Form Press, Former Adapter, and Flat Bracelet Formers. Large: 2" diameter. Mount on Former Adapter (sold separately) and use with Large (2") Flat Bracelet Former. Small: 1-1/2" diameter. Mount on Former Adapter (sold separately) and use with Small (1.5") Flat Bracelet Former. Use two washers with Former Adapter for Small Flat Conformer.

This earring drop matches one of the designs on the EXCLUSIVE pattern plate that was part of the April 2024 Subscription Box: Dynamic Drop Earrings. The plate is not available to purchase, as box items are exclusive to subscribers, but the design of this pancake die can be used in myriad other ways! 21.5 x 26mm.

This earring drop matches one of the designs on the EXCLUSIVE pattern plate that was part of the April 2024 Subscription Box: Dynamic Drop Earrings. The plate is not available to purchase, as box items are exclusive to subscribers, but the design of this pancake die can be used in myriad other ways! 23 x 25mm

This earring drop matches one of the designs on the EXCLUSIVE pattern plate that was part of the April 2024 Subscription Box: Dynamic Drop Earrings. The plate is not available to purchase, as box items are exclusive to subscribers, but the design of this pancake die can be used in myriad other ways! 24 x 34mm.

Design Dimensions: Left: 3/8" Right: 1/2" x 7/16" from Caco

16.5 x 17mm. 11.3 x 6.5mm center.

20 x 15mm. If desired, you can use a ball bur to remove the "1902" from the impression die before stamping.

Overall size: 2" x 6-7/8". Each design element is approx. 1" tall

Overall size: 2" x 6-7/8".

These stampings are direct from Janvier in France. Sold in sets of 2. Limited Quantity! 40 x 35.9mm. approx. 1.2mm thick.

These stampings are direct from Janvier in France. Sold in sets of 2. Limited Quantity! 88.6 x 78mm. approx. 2mm thick.

These stampings are direct from Janvier in France. Sold in sets of 2. Limited Quantity! 71 x 38mm. approx. 1.5mm thick.

These stampings are direct from Janvier in France. Sold in sets of 2. Limited Quantity! 63.2 x 59.3mm. approx. 1.5mm thick.

These stampings are direct from Janvier in France. Sold in sets of 2. Limited Quantity! 32 x 68.2mm. approx. 1.5mm thick.

These stampings are direct from Janvier in France. Sold in sets of 2. Limited Quantity! 41.1 x 45.3mm. approx. 18g.

These stampings are direct from Janvier in France. Sold in sets of 2. Limited Quantity! 28.8 x 32.7mm. approx. 18g.

3/8" x 9/16". ~1/4" deep.

Overall size: 2" x 6-7/8". Designs from left to right measure: 7/8" x 1/2", 7/8" x 5/8", Center design measures 13/16" diameter, 5/8" x 1/2", 3/4" x 13/16", 3/4" x 5/8"

Overall size: 2" x 6-7/8".

Overall size: 2" x 6-7/8".

2" x 2-9/16". Die: 6-1/2" x 3-1/2". Matches RMP018

1-5/8" x 1-9/16". Die: 6-5/16" x 3-1/16" Matches RMP018

2-5/8" x 1-5/8". Die: 6-3/4" x 3-5/8". Matches RMP018

2" x 6-7/8" Designed for use in a rolling mill.

1-7/16" x 1-1/16". Die: 6" x 3-3/8". Matches RMP296

1-3/16" x 1-1/4". Die: 5-3/8" x 3-3/8". Matches RMP296

1-15/16" x 1". Die: 6-1/4" x 3-3/8" Matches RMP296

1-3/4" x 15/16". Die: 6" x 3-3/8". Matches RMP296

1-1/16" x 1-13/16". Die: 5-1/2" x 3-3/4". Matches RMP296

Design- 2-3/4" x 13/16". Overall die measurements- 7-1/4" x 3-3/8"