1-1/32" x 6-1/2" (26.3 x 165mm) Designed for use in a rolling mill.

Design: 15/16" x 5/8" Die Set Includes: Die Top, with precision-welded cutter Die Bottom, with precision-registered center hole and metal guide marks on bottom- and right-side edges to assist in lining up metal in the die Urethane: Specific to each die set; not interchangeable with other designs. Color may vary. The components of each Die set are not interchangeable with other die sets, but all can be used with a single, standard Die Shoe. MUST BE USED WITH THE FSS DIE SHOE (available separately) Watch Kevin demonstrate how to use this die: https://youtu.be/7Gl-ShVKtlk

Design: 1-7/16" x 1" Die Set Includes: Die Top, with precision-welded cutter Die Bottom, with precision-registered center hole and metal guide marks on bottom- and right-side edges to assist in lining up metal in the die Urethane: Specific to each die set; not interchangeable with other designs. Color may vary. The components of each Die set are not interchangeable with other die sets, but all can be used with a single, standard Die Shoe. MUST BE USED WITH THE FSS DIE SHOE (available separately) Watch Kevin demonstrate how to use this die: https://youtu.be/7Gl-ShVKtlk

Design: 1-9/16" x 1-1/4" Die Set Includes: Die Top, with precision-welded cutter Die Bottom, with precision-registered center hole and metal guide marks on bottom- and right-side edges to assist in lining up metal in the die Urethane: Specific to each die set; not interchangeable with other designs. Color may vary. The components of each Die set are not interchangeable with other die sets, but all can be used with a single, standard Die Shoe. MUST BE USED WITH THE FSS DIE SHOE (available separately) Watch Kevin demonstrate how to use this die: https://youtu.be/7Gl-ShVKtlk

Design: 1" flower Die Set Includes: Die Top, with precision-welded cutter Die Bottom, with precision-registered center hole and metal guide marks on bottom- and right-side edges to assist in lining up metal in the die Urethane: Specific to each die set; not interchangeable with other designs. Color may vary. The components of each Die set are not interchangeable with other die sets, but all can be used with a single, standard Die Shoe. MUST BE USED WITH THE FSS DIE SHOE (available separately) Watch Kevin demonstrate how to use this die: https://youtu.be/7Gl-ShVKtlk

Design: 1-1/4" flower Die Set Includes: Die Top, with precision-welded cutter Die Bottom, with precision-registered center hole and metal guide marks on bottom- and right-side edges to assist in lining up metal in the die Urethane: Specific to each die set; not interchangeable with other designs. Color may vary. The components of each Die set are not interchangeable with other die sets, but all can be used with a single, standard Die Shoe. MUST BE USED WITH THE FSS DIE SHOE (available separately) Watch Kevin demonstrate how to use this die: https://youtu.be/7Gl-ShVKtlk

Design: 1-1/2" flower Die Set Includes: Die Top, with precision-welded cutter Die Bottom, with precision-registered center hole and metal guide marks on bottom- and right-side edges to assist in lining up metal in the die Urethane: Specific to each die set; not interchangeable with other designs. Color may vary. The components of each Die set are not interchangeable with other die sets, but all can be used with a single, standard Die Shoe. MUST BE USED WITH THE FSS DIE SHOE (available separately) Watch Kevin demonstrate how to use this die: https://youtu.be/7Gl-ShVKtlk

Lucky Dog Club is now available any time! Previously, it was offered quarterly. Now, you can sign up whenever you’d like! Becoming a member of the Lucky Dog Club gives you free domestic shipping on all orders* for one year. All orders placed by members, whether you spend $5 or $1000+, ship free. This option is perfect for those who love our Dies of the Day and prefer to make multiple small purchases!

This listing is for one pattern plate; see the second photo for explanation of the three items in the photo. Design: 1-11/16" x 6-3/4" x ~1/8"

Design: 1-7/8" x 1-1/8" Die Set Includes: Die Top, with precision-welded cutter Die Bottom, with precision-registered center hole and metal guide marks on bottom- and right-side edges to assist in lining up metal in the die Urethane: Specific to each die set; not interchangeable with other designs. Color may vary. The components of each Die set are not interchangeable with other die sets, but all can be used with a single, standard Die Shoe. MUST BE USED WITH THE FSS DIE SHOE (available separately) Watch Kevin demonstrate how to use this die: https://youtu.be/7Gl-ShVKtlk

This listing is for one pattern plate; see the second photo for explanation of the three items in the photo. Design: 1-11/16" x 6-3/4" x ~1/8"

This listing is for one pattern plate; see the second photo for explanation of the three items in the photo. Each Ring Design is : 2 7/8" long x 3/8" wide

This listing is for one pattern plate; see the second photo for explanation of the three items in the photo. Design: 1-11/16" x 6-3/4" x ~1/8"

Design: 1-3/16" (30.7mm) Rounded Square Die Set Includes: Die Top, with precision-welded cutter Die Bottom, with precision-registered center hole and metal guide marks on bottom- and right-side edges to assist in lining up metal in the die Urethane: Specific to each die set; not interchangeable with other designs. Color may vary. The components of each Die set are not interchangeable with other die sets, but all can be used with a single, standard Die Shoe. MUST BE USED WITH THE FSS DIE SHOE (available separately) Watch Kevin demonstrate how to use this die: https://youtu.be/7Gl-ShVKtlk

Design: 20mm Rounded Square Die Set Includes: Die Top, with precision-welded cutter Die Bottom, with precision-registered center hole and metal guide marks on bottom- and right-side edges to assist in lining up metal in the die Urethane: Specific to each die set; not interchangeable with other designs. Color may vary. The components of each Die set are not interchangeable with other die sets, but all can be used with a single, standard Die Shoe. MUST BE USED WITH THE FSS DIE SHOE (available separately) Watch Kevin demonstrate how to use this die: https://youtu.be/7Gl-ShVKtlk

Design: Heart 1-1/4" x 1-3/16" Die Set Includes: Die Top, with precision-welded cutter Die Bottom, with precision-registered center hole and metal guide marks on bottom- and right-side edges to assist in lining up metal in the die Urethane: Specific to each die set; not interchangeable with other designs. Color may vary. The components of each Die set are not interchangeable with other die sets, but all can be used with a single, standard Die Shoe. MUST BE USED WITH THE FSS DIE SHOE (available separately) Watch Kevin demonstrate how to use this die: https://youtu.be/7Gl-ShVKtlk

This listing is for one pattern plate; see the second photo for explanation of the three items in the photo. Design: 1-11/16" x 6-3/4" x ~1/8"

Design: 1-1/4" Circle Tag Shape w/Tab for a Jump Ring Die Set Includes: Die Top, with precision-welded cutter Die Bottom, with precision-registered center hole and metal guide marks on bottom- and right-side edges to assist in lining up metal in the die Urethane: Specific to each die set; not interchangeable with other designs. Color may vary. The components of each Die set are not interchangeable with other die sets, but all can be used with a single, standard Die Shoe. MUST BE USED WITH THE FSS DIE SHOE (available separately) Watch Kevin demonstrate how to use this die: https://youtu.be/7Gl-ShVKtlk

Design: 1-1/2" Circle Tag Shape w/Tab for a Jump Ring Die Set Includes: Die Top, with precision-welded cutter Die Bottom, with precision-registered center hole and metal guide marks on bottom- and right-side edges to assist in lining up metal in the die Urethane: Specific to each die set; not interchangeable with other designs. Color may vary. The components of each Die set are not interchangeable with other die sets, but all can be used with a single, standard Die Shoe. MUST BE USED WITH THE FSS DIE SHOE (available separately) Watch Kevin demonstrate how to use this die: https://youtu.be/7Gl-ShVKtlk

Design: 1" Circle Tag Shape w/Tab for a Jump Ring Die Set Includes: Die Top, with precision-welded cutter Die Bottom, with precision-registered center hole and metal guide marks on bottom- and right-side edges to assist in lining up metal in the die Urethane: Specific to each die set; not interchangeable with other designs. Color may vary. The components of each Die set are not interchangeable with other die sets, but all can be used with a single, standard Die Shoe. MUST BE USED WITH THE FSS DIE SHOE (available separately) Watch Kevin demonstrate how to use this die: https://youtu.be/7Gl-ShVKtlk

This listing is for one pattern plate; see the second photo for explanation of the three items in the photo. 2" x 6-3/4" x ~1/8"

This listing is for one pattern plate; see the second photo for explanation of the three items in the photo. 2" x 6-3/4" x ~1/8"

This organic texture is sure to catch your customers' eye! This listing is for one pattern plate; see the second photo for explanation of the three items in the photo. 2" x 6-3/4" x ~1/8"

This split scales pattern is perfect for mermaid, dragon, or reptilian designs! This listing is for one pattern plate; see the second photo for explanation of the three items in the photo. 2" x 6-3/4" x ~1/8"

Hand-carved by renowned engraver, Bill Rice, this extra-skinny version of his popular hummingbird design pairs well with pancake die B019. This listing is for one pattern plate; see the second photo for explanation of the three items in the photo. ~3/4" x 6" (18.5mm x 15.1cm)

Design Size: 2" x 6-3/4"; ~1/8" thick

Design Size: 1-5/8" x 6-11/16"; ~1/8" thick

This ultra-fine pattern was made by Kevin on an antique straight-line guilloche machine. The texture is SHALLOW and an exact replica of the guilloche pattern created by the machine. It's a perfect background texture, and is beautiful with transparent enamel. Design Size: 1-1/16" x 6-3/8"; ~1/8" thick

This ultra-fine pattern was made by Kevin on an antique straight-line guilloche machine. The texture is SHALLOW and an exact replica of the guilloche pattern created by the machine. It's a perfect background texture, and is beautiful with transparent enamel. Design Size: 1-9/16" x ~6"; ~1/8" thick

17/32" x 1-5/8" (13.6 x 42.1mm)

5/16" x 1-1/4" (9 x 31.9mm)

We've brought back this popular design from the October 2017 subscription box, but in a different size! 15/16" x 3/4" (23.2 x 19.1mm)

We've brought back this popular design from the November 2017 subscription box, but in a different size! 1-5/16" x 1-5/16" (33 x 33mm)

We've brought back this popular design from the November 2017 subscription box, but in a different size! 1-1/16" x 1-1/16" (27.4 x 27.4mm)

We've brought back this popular design from the November 2017 subscription box, but in a different size! 5/8" x 5/8" (16.5 x 16.5mm)

We've brought back this popular design from the January 2017 subscription box, but in a different size! 3/4" x 11/16" (18 x 17mm)