Overall Design Size: approximately 2" x 7" Designed for use in a rolling mill.

Overall Design Size: approximately 2" x 7" Designed for use in a rolling mill.

Overall Design Size: approximately 2" x 7" Designed for use in a rolling mill. This pattern plate was originally a black Friday giveaway in 2021.

Overall Design Size: approximately 2" x 7" Designed for use in a rolling mill.

Overall Design Size: approximately 2" x 7" Designed for use in a rolling mill.

Overall Design Size: approximately 2" x 7" Designed for use in a rolling mill.

Cat: 39 x 16.5mm. Die: 5-3/4" x 3-1/2"

Approx. 16 gauge (Due to supply challenges, gauge may vary.) Design: 2-3/4" x 1/2" NOTE: Each stamping is made in house, one at a time, using vintage tools and processes. The detail in each stamping may vary, and a stamping with less detail is not considered defective.

Overall Design Size: approximately 2" x 7" Designed for use in a rolling mill.

Overall Design Size: approximately 2" x 7" Designed for use in a rolling mill.

Overall Design Size: approximately 2" x 7" Designed for use in a rolling mill.

This shape is meant to be folded in half to create a keychain - no need for soldering! Shape - 4-3/8" x 1-1/8" Die itself - 5-5/8" x 6-3/8"

This shape is meant to be folded in half to create a keychain - no need for soldering! Shape - 4-3/8" x 1-3/16" Die itself - 5-5/8" x 6-3/8"

This die must be used in a hydraulic press. Design: 1/2" x 3/4" (13mm x 22mm). Overall die measures 3-3/8" x 5-3/16".

This die must be used in a hydraulic press. Design: 13/16" x 3/4" (20mm x 19mm). Overall die measures 3-3/8" x 5-3/16".

This die must be used in a hydraulic press. Design: 13/16" x 7/16" (21mm x 11mm). Overall die measures 3-3/8" x 5-3/16".

This die must be used in a hydraulic press. Design: 3/4" x 5/8" (19mm x 16mm). Overall die measures 3-3/8" x 5-3/16".

This die must be used in a hydraulic press. Design: 1-1/4" x 1/2" (32mm x 13mm). Overall die measures 3-3/8" x 5-13/16".

This die must be used in a hydraulic press. Design: 1-3/8" x 13/16" (36mm x 21mm). Overall die measures 3-3/8" x 5-13/16".

This die must be used in a hydraulic press. Design: 7/8" x 13/16" (22mm x 20mm). Overall die measures 3-3/8" x 5-3/8".

This die must be used in a hydraulic press. Design: 1-3/16" x 3/4" (30mm x 19mm). Overall die measures 3-3/8" x 5-5/8".

This die must be used in a hydraulic press. Design: 1" x 11/16" (25mm x 17mm). Overall die measures 3-3/8" x 5-3/8".

This die must be used in a hydraulic press. Design: 1" x 13/16" (25mm x 21mm). Overall die measures 3-3/8" x 5-3/16".

This die must be used in a hydraulic press. Design: 1" x 13/16" (25mm x 21mm). Overall die measures 3-3/8" x 5-3/16".

This easy-to-use ear wire jig makes it easy to make repeatable, consistently sized kidney-style ear wires. This tool is NOT used in a hydraulic press. Finished ear wire is approx. 7/8" long, 3/8" wide, and features an outward bend in the end of the wire and catch for a secure hold. The loop is approx. 3mm diameter. Recommended for use with half-hard 20g wire.

35.4 x 10mm Customer Demo by Danielle Nicole from Dogwood Designs.

Overall Design Size: approximately 2" x 7" Designed for use in a rolling mill.

Overall Design Size: approximately 2" x 7" Designed for use in a rolling mill.

Overall Design Size: approximately 2" x 7" Designed for use in a rolling mill.

Overall Design Size: approximately 2" x 7" Designed for use in a rolling mill.

Overall Design Size: approximately 2" x 7" Designed for use in a rolling mill.

This mount is meant to be used with our wire-forming tools. Each wire-forming tool includes two mounting holes that fit securely onto the pegs in this mount. The mount has two holes where it can be secured to a work surface with screws. Once attached to a work surface, each wire-forming tool can be dropped down onto the mount and held securely in place with the pegs. Changing out tools is as easy as lifting the wire former off the pegs and replacing it with a different wire former. The mount measures 5" x 2". Wire forming tools SOLD SEPARATELY.

Overall Design Size: approximately 2" x 7" Designed for use in a rolling mill.

This shape is meant to be folded in half to create a keychain - no need for soldering! Shape - 4-5/16" x 1-1/8" Die itself - 5-5/8" x 6-3/8"

This die must be used in a hydraulic press. Design: 1-9/16" x 1/2" (40mm x 13mm). Overall die measures 3-9/16" x 5-3/8". Sample earrings by Lynette Andreasen.

1" x 9/16" (25mm x 15mm) Die: 5-3/16" x 3-3/8" This die is coordinated to work with the smaller shapes on Pattern Plate RMP287 Boho Leaves.