This earring drop matches one of the designs on the EXCLUSIVE pattern plate that was part of the April 2024 Subscription Box: Dynamic Drop Earrings. The plate is not available to purchase, as box items are exclusive to subscribers, but the design of this pancake die can be used in myriad other ways! 24 x 34mm.

Design Dimensions: Left: 3/8" Right: 1/2" x 7/16" from Caaco

16.5 x 17mm. 11.3 x 6.5mm center.

20 x 15mm. If desired, you can use a ball bur to remove the "1902" from the impression die before stamping.

Overall size: 2" x 6-7/8". Each design element is approx. 1" tall

Overall size: 2" x 6-7/8".

These stampings are direct from Janvier in France. Sold in sets of 2. Limited Quantity! 40 x 35.9mm. approx. 1.2mm thick.

These stampings are direct from Janvier in France. Sold in sets of 2. Limited Quantity! 88.6 x 78mm. approx. 2mm thick.

These stampings are direct from Janvier in France. Sold in sets of 2. Limited Quantity! 71 x 38mm. approx. 1.5mm thick.

These stampings are direct from Janvier in France. Sold in sets of 2. Limited Quantity! 63.2 x 59.3mm. approx. 1.5mm thick.

These stampings are direct from Janvier in France. Sold in sets of 2. Limited Quantity! 32 x 68.2mm. approx. 1.5mm thick.

These stampings are direct from Janvier in France. Sold in sets of 2. Limited Quantity! 41.1 x 45.3mm. approx. 18g.

These stampings are direct from Janvier in France. Sold in sets of 2. Limited Quantity! 28.8 x 32.7mm. approx. 18g.

3/8" x 9/16". ~1/4" deep.

Overall size: 2" x 6-7/8". Designs from left to right measure: 7/8" x 1/2", 7/8" x 5/8", Center design measures 13/16" diameter, 5/8" x 1/2", 3/4" x 13/16", 3/4" x 5/8"

Overall size: 2" x 6-7/8".

Overall size: 2" x 6-7/8".

2" x 2-9/16". Die: 6-1/2" x 3-1/2". Matches RMP018

1-5/8" x 1-9/16". Die: 6-5/16" x 3-1/16" Matches RMP018

2-5/8" x 1-5/8". Die: 6-3/4" x 3-5/8". Matches RMP018

2" x 6-7/8" Designed for use in a rolling mill.

1-7/16" x 1-1/16". Die: 6" x 3-3/8". Matches RMP296

1-3/16" x 1-1/4". Die: 5-3/8" x 3-3/8". Matches RMP296

1-15/16" x 1". Die: 6-1/4" x 3-3/8" Matches RMP296

1-3/4" x 15/16". Die: 6" x 3-3/8". Matches RMP296

1-1/16" x 1-13/16". Die: 5-1/2" x 3-3/4". Matches RMP296

Design- 2-3/4" x 13/16". Overall die measurements- 7-1/4" x 3-3/8"

1-1/8" x 1-15/16". Die: 5-3/16" x 4-1/8". Matches RMP209

1-3/16" x 2-1/8". Die: 5-3/16" x 4-1/8". Matches RMP209

1-3/16" x 1-13/16". Die: 5-1/4" x 3-3/4". Matches RMP209

Put a Spring in Your Step with these flowering cowboy boots, just in time for Rodeo season out west! Design: 1-3/16" tall each Designed for use in a rolling mill.

~7/16" x ~3" (11.3 x 75.4mm). For use in a rolling mill.

~7/16" x ~3" (11.3 x 75.4mm). For use in a rolling mill.

2" x 6-7/8"

2" x 6-7/8"

Overall size: 2" x 6-7/8". Bracelet design 1-1/8" x 6-1/4".