Design: 3-1/2" x 2-11/16" Die itself: 7" x 4-1/2" Coordinated to work with the 3" Spoon Shape B Dish Former Silhouette Die (DF-033). ***Will not fit in the discontinued Potter USA medium press***
3-3/16" wide x 3-1/2". Overall die size measurements 7-3/4" x 5-3/16". Coordinated to work with DF018 Dish Former Silhouette Die Hamsa. Will not fit in the discontinued medium PotterUSA press.
You asked for small pancake dies, and we listened! This mini star is only 3/8" wide. Due to its size, it requires care when using it to ensure it stays aligned.
This die can be used to make a lid for the 2" box (made with Pancake Die 1518). Designed to be used with 20 GAUGE SHEET METAL. Cutting area is 3" across each direction at the largest points. The smaller sides are 1/2"" The outer area of the die is 5 1/4" wide x 7 3/4" high. ***Will not fit in the discontinued Potter USA medium press***
This die can be used to make a small box that is 2" x 2" x 1" tall. Designed to be used with 20 GAUGE SHEET METAL. Cutting area is 4" across each direction at the largest points. The smaller sides are 1" The outer area of the die is 7" wide x 8 1/2" high. ***Will not fit in the discontinued Potter USA medium press***
This bundle includes THREE pancake dies that together make a layered Christmas Tree Design. Elements can be soldered together, joined with jump rings, or combined any way you like! PD1841 Shape measurements: 3-1/8" x 1-7/8" PD1841 Die measurements: 7-3/8" x 4-1/2" PD1842 Shape Measurements: 2-1/2" x 1-3/4" PD1842 Die measurements: 6-1/2" x 4-1/8" PD1843 Shape Measurements: 2-1/8" x 1-3/4" PD1843 Die measurements: 6-1/4" x 4-1/8"
Design: 3-1/2"from point to center of opposite edge, 3-3/8" from point to point Die itself: 7-7/8" x 5-3/8 Coordinated to work with the 3" Trillion Shape Dish Former Silhouette Die. ***Will not fit in the discontinued Potter USA medium press***
This die must be used in a hydraulic press. Shape measures 1-3/4" x 3/4". Overall die measures 5-1/4" x 3-3/4". This die pairs well with PD 1639 and PD 1641.
This bundle includes TWO pancake dies that together make a sweet little bow. PD1679 creates the loop shape of the bow and PD1680 creates the ribbon portion of the bow. PD1679 Shape measurements: 2-1/4" x 1/2" PD1679 Die measurements: 4" x 5" PD1680 Shape Measurements: 1" x 3/4" PD1680 Die measurements: 3-7/16" x 5-1/2" Customer samples by Karyn Fawcett
This earring drop matches one of the designs on the EXCLUSIVE pattern plate that was part of the April 2024 Subscription Box: Dynamic Drop Earrings. The plate is not available to purchase, as box items are exclusive to subscribers, but the design of this pancake die can be used in myriad other ways! 21.5 x 26mm.
This die must be used in a hydraulic press. Design: 1-9/16" x 1-1/4". Overall die measures 3-3/8" x 6-3/16". This die is coordinated to work with RMP 321
1527-B Coffin Box Base: 1-1/2" x 1". 3/4" Tall Walls. Designed to be used with 20 GAUGE SHEET METAL. Overall Pancake Die Dimensions: 7" x 5" 1527-T Coffin Box Top: 1-11/16" x 1-1/16". 1/4" Tall Walls. Overall Pancake Die Dimensions: 6" x 4-1/8" *Makes finished box bottom that is 1-1/2" long and 3/4" deep and a box top that is 1-5/8" and 1/4" deep