Quick-Form Press Angle Forming Set

An adapter to be used with the Flat Bracelet Conformers. Use ONLY with the Quick-Form Press, and Flat Bracelet Formers.

Two delrin conforming formers in 2" and 1.5" diameter. Use ONLY with the Quick-Form Press, Former Adapter, and Flat Bracelet Formers. Large: 2" diameter. Mount on Former Adapter (sold separately) and use with Large (2") Flat Bracelet Former. Small: 1-1/2" diameter. Mount on Former Adapter (sold separately) and use with Small (1.5") Flat Bracelet Former. Use two washers with Former Adapter for Small Flat Conformer.

Use ONLY with the Quick-Form Press and Urethane Pusher. Large: 2" diameter. Mount to Tool Mounting Plate at 4th hole. Small: 1-1/2" diameter. 1-1/4" forming width. Must use with Small Tooling Adapter (included with press purchase). Mount to Tool Mounting Plate at 3rd & 5th holes. Use two washers with Urethane Pusher for Small Flat Former.

This spacer measures 7-3/4" in length, 4-1/2" in width, and is 1/2" thick. It is nonmagnetic. Spacers are used in the press to lessen the amount of effort needed to extend the jack and activate the items being used in the press. Top and bottom platens are not meant to touch - it will cause the jack to overextend and cause leaking, or for jack to fail. Always use spacers on lower platen to take up space between platens.

For use only with Dish Former Silhouette Dies. ~4.75" x 4.75" 60-70 durometer. Color may vary. 1/4" thick.