Impression Die Victorian Elements Shot Plate

Design Dimensions: 1-5/16" x 7/16" from Romart

Shot Plate Design Dimensions: Left: 1" x 5/16" at its widest point Right: 1" x 5/16" at its widest point from Rumart

1.157 tall 0.540 wide

This spacer is 4.5'' x 7.75'' and 1'' thick. Non magnetic Spacers are used in the press to lessen the amount of effort needed to extend the jack and activate the items being used in the press. Top and bottom platens are not meant to touch - it will cause the jack to overextend and cause leaking, or for jack to fail. Always use spacers on lower platen to take up space between platens.

3 inch diameter x 2 inch height contained urethane with metal pusher (pusher not pictured). Comes with 95 durometer urethane. ***You can use this with 2 inch silhouette dies, BUT, the impression will not be able to get as deep as with the 2 x 2 contained urethane. NOT for use with impression dies.